1. Introductioni RiiUiARiiim 1.1 I ntroductIon
Thank you for purchasing a RTT Spray Booth, powder booth.
Read and understand this manual before using your booth and follow all of the safety instructions. Keep this manual with your booth at all times.
This manual explains the assembly and routine maintenance of the RTT powder booth.
This manual covers a family of RTT Spray Booths, powder booths. The following booths are covered:
• Industrial Spray to Waste Batch Powder Booths • (PB) Recovery Cartridge Style Powder Booths (RPB and RPC) • EZ Pass Thru Powder Booths (EPB)
The powder booth itself consists of four major components: powder application area, collection/extraction chamber, exhaust fan and chamber, and in some cases product doors. A brief description is provided for these and other related items. The parts to be powder coated are placed in the powder application area, through the booth opening or product doors (if so equipped). Air flows through the booth opening(s) to the exhaust filters. Exhaust filters will vary based on the style of booth purchased. The booth exhaust is routed the exhaust plenum(s) at the exit of the booth. The exhaust fan then routes the exhaust out through the Final Filters and discharges clean contaminate free air back into the powder coating room. The text contained in this manual is for current production models. Some instructions and maintenance procedures may not apply to your specific unit. Equipment modifications from original design and specifications are strictly prohibited. Modifications may compromise safe operation of the booth, subjecting users to serious injury or death and may void any remaining warranty. This Operator’s Manual does not replace, nor does its use release the operator from observing all safety or operating limitations as well as any applicable federal, state, provincial or local regulations.
1.2 r eceIvIng , u npackIng , a nd r eportIng M IssIng I teMs
When receiving and unloading equipment check for damage. Note on Bill of Lading “FREIGHT DAMAGE.” Notify the RTT customer service department immediately of any damage. Unpack all items and verify on packing list within ten (10) days of receipt. Notify RTT customer service department of missing items and discrepancies immediately. RTT will not pay for overnight freight on shorted items. If overnight freight is necessary, the buyer shall be accountable for freight costs.
For quality control, RTT's Shipping Department photographs all items as they are packed.
Per company policy, two independent checks are performed to verify each item against the packing list. If RTT determines that the reported shortage was checked off in our records, replacement parts will be shipped AND invoiced accordingly.
Made with FlippingBook - professional solution for displaying marketing and sales documents online