AOCHM Series dimensions
OUTLET PORT
INLET PORT
2
10.50
hydraulic motor schematic
2.31
L
9.88
5.25
6.31
0.62
K
0.75
J
Approximate E
A
10.36
1.62
1.75
G
Air Flow
H
B
C
F
3
1.25
D
M *
1
0.56"Dia. Mounting Hole (6x)
H G DIMENSIONS (inches) F E
M SAE
M NPT
C D
Model
A
B
J
K
L
1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00
12.94 17.13 18.50 21.81 24.81 29.75 31.94 39.75
16.81 21.00 22.38 25.81 28.68 33.63 35.81 43.63
5.90 6.56 7.88 9.19
15.21 15.21 15.21 15.21 15.21 15.21 15.21 15.21
11.69 15.88 17.25 20.56 23.56 28.50 30.69 38.50
9.19 10.50 13.12 15.75 21.00 24.94 27.56 34.12
11.81 13.13 15.75 18.38 23.63 27.56 30.19 36.75
8.31 12.50 13.88 17.19 20.19 25.13 27.31 35.13
7.69 8.88
14.81 19.00 20.38 23.81 26.68 31.63 33.81 41.63
AOCHM - 5 - AOCHM - 10 - AOCHM - 15 - AOCHM - 20 - AOCHM - 25 - AOCHM - 30 - AOCHM - 35 - AOCHM - 40 -
____
24 SAE 1 7/8 -12UN-2B Thread 32 SAE 2 1/2 -12UN-2B Thread
____
11.50 14.00 19.25 23.19 25.81 32.38
____
____
11.81 13.78 15.09 18.38
____
11.00 11.00 13.25
Represents options.
Notes : 1) Removable foot mounting brackets are supplied with unit at no additional charge. 2) 1/2-12UNC-2BTabs, 4 points, 8 points onmodels AOCHM - 30,35 & 40 (top & bottom) for optional mounting purposes. 3) Motor mounting bracket is rotated 90 degrees on AOCHM - 5 & 10 units.
4) Louvers are manually adjustable. However, all units are available with a screen front as an option (specify when ordering). 5) All units are available with an optional preset 30 or 65-psi pressure bypass valve. (see note "i" on page 155) 6) All units can be connected in one or Two Pass configuration. Re - fer to piping instructions for detailed operating and maintenance information.
Example of a model:
AOCHM - 40 - 9 - S - R65 - 2P -____ - ____
Model
Coating Blank = Enamel (standard) G = Galvanize (cabinet) T = Heresite (core) X = Epoxy (cabinet) STS = Stainless Steel (cabinet)
Size
Number of Passes Tubing Blank = Copper U = 90/10 Cu Ni C = Carbon Steel SS - Stainless Steel 1P = 1 pass 2P = 2 pass
Drive Type
Connections
N = No motor 9 = Hydraulic motor
Blank = NPT S = SAE O-Ring F = 4 Bolt Flange A = ANSI 150#RF Flange
Bypass R30 = 30psi R65 = 65psi
note: AIHTI reserves the right to make reasonable design changes without notice.
176
Copyright © 2019 - 2020 American Industrial Heat Transfer, Inc.
355 American Industrial Drive LaCrosse, VA 23950
tel: 434-757-1800
fax: 434-757-1810
email: sales@aihti.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online