Ag Equipment and Machinery Transport Planning Toolkit - v1.1

A practical pre-move guide for tractors, combines, sprayers, implements, and other agricultural equipment. Prepare the Machine. Plan the Move. Protect the Schedule.

AGRICULTURAL EQUIPMENT & MACHINERY TRANSPORT PLANNING TOOLKIT

A practical pre-move guide for tractors, combines, sprayers, implements and other agricultural equipment.

Prepare the Machine. Plan the Move. Protect the Schedule.

Presented by

5130 Executive Blvd. • Fort Wayne, IN 46808 • 260.471.1877 • buchananlogistics.com

THE TRANSPORT STARTS BEFORE THE TRUCK ARRIVES

The Machine Is Only One Part of the Move Moving agricultural equipment can involve much more than finding a truck large enough to haul it. Modern farm machinery may be wide, tall, heavy, difficult to load, equipped with removable components, or located somewhere that presents its own access challenges. The delivery schedule may also be tied directly to:

• Planting • Harvest • Field preparation • Application windows

• Equipment sales • Dealer transfers • Auctions

• Repairs • Seasonal production • Customer commitments

That makes accurate information and early planning especially important. This toolkit will help you organize the details a transportation provider needs before your equipment moves.

USE THIS TOOLKIT WHEN TRANSPORTING:

• Tractors • Combines • Sprayers • Balers

• Fertilizer spreaders • Tillage equipment • Harvest equipment • Headers • Implements and attachments

• Irrigation equipment • Specialty agricultural machinery • Other oversized or heavy farm equipment

• Planters • Seeders

START WITH THESE SIX QUESTIONS

1. Exactly what machine or equipment is moving? 2. What are its dimensions and weight in its transportation configuration that need to be considered? 3. Which attachments or components will travel with it? 4. How will it be loaded and unloaded? 5. Can the transportation equipment access both locations? 6. What operational or seasonal milestone depends on its arrival? The following pages will help you answer each one.

IDENTIFY THE ACTUAL MACHINE

Step 1: Build an Accurate Equipment Profile Start with the actual piece of equipment; not simply the general equipment category. Instead of providing: “Tractor” Provide the: MANUFACTURER + MODEL + CONFIGURATION Agricultural equipment of the same general type can vary significantly in dimensions, weight, and transportation requirements.

EQUIPMENT PROFILE

Equipment type: _____________________________________

Serial / asset number, if needed: _____________________________________

Manufacturer: __________________

Model: __________________

Year, if relevant: ___________________

Quantity: ___________________

CURRENT CONFIGURATION

Check all that apply:

F Standard factory configuration F Modified from factory configuration

F Tracks F Front weights F Rear weights F Front attachment

F Rear attachment F Loader installed F Header attached F Implement attached

F Dual tires F Triple tires

F Other:_________________________________________________________________ A manufacturer’s base specifications may not accurately reflect a machine after tires, tracks, weights, attachments or other components are installed. Transportation should be planned around the machine that will actually be loaded onto the trailer .

MEASURE IT AS IT WILL SHIP

Step 2: Confirm the Transportation Dimensions Accurate dimensions are essential when evaluating transportation equipment and potential oversized load requirements. Measure the equipment in the configuration in which it will actually travel.

PRIMARY MACHINERY

Overall Length:________________________ Overall Width:_________________________

Overall Height:________________________ Total Weight:__________________________

ADDITIONAL INFORMATION

Ground clearance:_ ___________________________________________________________ Wheelbase / track length:_______________ Outside tire / track width:_______________

BEFORE RECORDING THE DIMENSIONS, CONFIRM:

F Tires/tracks are in their correct transportation configuration F Attachments have been included or removed as planned F Mirrors have been accounted for F Exhaust components have been included

F GPS/antenna equipment has been taken into consideration F Handrails and steps have been considered F Cab height has been verified F Shipping frame/skid has been included where applicable

ALWAYS USE EXACT INFORMATION WHEN IT IS AVAILABLE A difference in width or height can affect: • Trailer selection • Route planning • Transportation cost • Scheduling Whenever possible, verify the actual dimensions of any freight before requesting final transportation arrangements. • Permit requirements • Escort requirements

ACCOUNT FOR ATTACHMENTS AND IMPLEMENTS

Step 3: Decide What Travels With the Machine Attachments can significantly change the transportation plan. • A tractor may have a loader. • A combine may travel with a header. • A sprayer may have booms that need to be positioned for transportation. Other equipment may have implements or components that require a separate trailer.

ATTACHMENT INVENTORY

ATTACHMENT / COMPONENT #1

Description:_ _________________________

Height:_______________________________ Weight:_ _____________________________ Travels attached to machine? F Yes F No

Length:_ _____________________________

Width:_ ______________________________

ATTACHMENT / COMPONENT #2

Description:_ _________________________

Height:_______________________________ Weight:_ _____________________________ Travels attached to machine? F Yes F No

Length:_ _____________________________

Width:_ ______________________________

ATTACHMENT / COMPONENT #3

Description:_ _________________________

Height:_______________________________ Weight:_ _____________________________ Travels attached to machine? F Yes F No

Length:_ _____________________________

Width:_ ______________________________

WILL AN ADDITIONAL TRUCK BE REQUIRED?

F Yes

F No

F Unknown

THINK ABOUT THE COMPLETE MOVE

The primary machine may not be the only freight. Account for everything before transportation is finalized.

• Attachment • Implement

• Header • Tire/wheel assembly

• Weight • Component

• Accessory • Shipping fixture

REVIEW WHAT CAN BE REMOVED OR REPOSITIONED

Step 4: Evaluate the Transportation Configuration Certain removable or adjustable components may affect the overall transportation profile. Depending on the machine, these could include: • Mirrors

• Steps • Tires/wheels • Attachments

• Implements • Headers • Weights

• GPS equipment • Exhaust components • Other removable components

• Antennas • Handrails

CONFIGURATION WORKSHEET

Component: _____________________________________ Can it be removed/repositioned? F Yes F No Will it be removed/repositioned? F Yes F No

Who will perform the work? _____________________________________ _____________________________________ Will it ship separately? F Yes F No

CONSIDER THE TOTAL COST

Reducing the dimensions of a machine may sometimes simplify transportation. However, component removal may also require:

• Labor • Specialized tools

• Lifting equipment • Additional transportation

• Reassembly • Additional project time

Evaluate the complete move rather than assuming that the smallest transportation profile automatically produces the lowest overall cost.

CONFIRM THE MACHINE’S OPERATING CONDITION Step 5: Can It Load Under Its Own Power? Whether the machine is operational can significantly affect loading and unloading.

MACHINE CONDITION

Does the machine start? F Yes F No Does it move under its own power? F Yes F No Does steering operate normally? F Yes F No

Do brakes operate normally? F Yes F No Are tires/tracks in suitable condition for loading? F Yes F No Are there known fluid leaks? F Yes F No

IF THE MACHINE DOES NOT RUN:

How will it be loaded?

F Winch F Crane

F Forklift F Other equipment F Unknown

COMMUNICATE NON-RUNNING EQUIPMENT BEFOREHAND Available loading equipment:__________________________________________________ ____________________________________________________________________________ Do not wait until the truck arrives to disclose that a machine: • Will not start • Cannot steer • Cannot brake • Has damaged tires or tracks • Cannot safely move under its own power A non-running machine may require a different loading plan or transportation equipment.

PREPARE THE MACHINE FOR TRANSPORT

Step 6: Complete the Pre-Move Equipment Check Preparation requirements vary by machine, manufacturer, and shipment. Use this checklist as a starting point and follow applicable manufacturer or equipment- specific requirements.

PRE-TRANSPORT CHECK

F Loose components secured F Doors/panels secured F Attachments are prepositioned and ready for transport F Mirrors reviewed F Antennas/GPS components reviewed F Exhaust height reviewed F Fluid caps secure

F Known leaks addressed F Tires inspected F Tracks inspected F Batteries/electrical requirements addressed where applicable F Keys available where needed F Machine photographed for condition, before transport

DOCUMENT CONDITION

Photograph: F Front F Rear

F Cab F Tires/tracks

F Operator side F Opposite side

F Attachments F Existing damage

F Identification plate if useful

PHOTOS ANSWER QUESTIONS BEFORE THE TRUCK ARRIVES

Provide current images whenever possible, especially if the machine is: • Unusually configured • Has attachments • Non-running • Has visible modifications

• Located at a hard to reach or difficult pickup site

CHOOSE TRANSPORT EQUIPMENT AROUND THE MACHINE Step 7: Understand the Trailer Options There is no single trailer that is right for every piece of agricultural equipment. Transportation equipment should be selected based on factors such as:

• Route • Weight

• Loading / unloading method • Machine configuration

• Dimensions • Ground clearance

• Pickup access • Delivery access

FLATBED

Open-deck transportation that may work for equipment and implements that fit the trailer’s dimensional and weight requirements and can be loaded appropriately.

STEP DECK / DROP DECK

Provides a lower main deck than a standard flatbed and may provide additional flexibility for taller agricultural machinery.

REMOVABLE GOOSENECK — RGN

The front portion of the trailer can be detached, allowing certain wheeled or tracked equipment to be driven or moved onto the lower deck. For that reason, RGNs are commonly considered for large tractors, combines, sprayers and other heavy machinery.

SPECIALIZED / MULTI-AXLE EQUIPMENT

Certain large or heavy agricultural machines may require specialized configurations based on weight, dimensions and transportation requirements.

EQUIPMENT SELECTION CHECK

Before selecting transportation equipment, confirm: F Length

F Weight F Ground clearance F Operational condition

F Loading method F Unloading method F Attachments

F Origin access F Destination location and access

F Width F Height

PLAN THE LOADING PROCESS

Step 8: Determine How the Machine Gets Onto the Trailer Do not assume the truck arriving with the correct trailer means the equipment can be loaded successfully.

LOADING METHOD

F Drive-on F Winch F Ramp F Other:______________________________________________ F Crane F Forklift

LOADING LOCATION

Facility / Farm / Dealer: _____________________________________ Loading contact: _____________________________________

Phone: _____________________________________ Loading date/time: _____________________________________

RESOURCES AVAILABLE

F Equipment operator F Crane

F Forklift F Loader

F Tow equipment F Mechanic

F Other:__________________________________________

LOADING AREA CHECK

F Firm ground F Adequate space F Trailer can maneuver F Overhead clearance adequate

F No known obstructions F Appropriate lighting if after hours F Loading personnel available

PLAN THE UNLOADING PROCESS SEPARATELY

Step 9: Make Sure the Destination Can Receive the Machine The conditions at origin may be very different from the conditions at destination. A machine loaded at a dealership with a paved yard could be delivered to:

• A farm or field • An auction facility

• A remote operation • An equipment yard

• A repair facility • A construction site

UNLOADING METHOD

F Drive-on F Winch

F Crane

F Forklift

F Ramp

F Other:______________________________________________

DESTINATION RESOURCES

Equipment operator available? F Yes F No

Crane required? F Yes

F No

Other equipment required?____________________________________________________

DESTINATION READINESS

F Unloading location identified F Ground conditions reviewed F Trailer access confirmed F Adequate turning space available

F Overhead clearance reviewed F Operator available F Unloading equipment ready F Site contact knows expected arrival

REVIEW FARM, DEALER AND SITE ACCESS

Step 10: Can the Actual Truck Reach the Equipment? Agricultural equipment is not always located at a commercial shipping facility. Pickup and delivery locations can include rural roads, farms, fields, dealerships and temporary equipment locations. Access should be reviewed for the truck and trailer that will actually perform the move .

ACCESS CHECKLIST

Road Approach

F Road is suitable for large truck/trailer access F Weight restrictions reviewed F Bridge restrictions considered

F Road width adequate F Tight turns identified F Seasonal restrictions considered

Property Entrance

F Entrance width adequate F Gate width adequate F Turning radius adequate

F Culvert/ditch crossing considered F Overhead wires/branches reviewed F Signage/mailboxes/other obstacles reviewed

On Property

F Ground firm enough F Sufficient maneuvering space F Loading/unloading area accessible

F Exit route available F No known low-clearance obstacles

The Right Question Isn’t ... “Can a truck get there?”

It Is ... “Can this truck and trailer combination get to the loading or unloading point and get back out?”

ROUTING, PERMITS AND ESCORTS

Step 11: Look Beyond the Mileage Agricultural machinery can be wider, taller or heavier than standard freight. For oversized or overweight equipment, additional transportation planning may need to be accounted for:

• Road restrictions • Bridges • Height clearances • Construction zones

• Weight restrictions • Travel-hour restrictions • Local restrictions • Permit requirements

• Escort requirements • Seasonal conditions • Weather • Route geometry

Requirements vary according to the machine, transportation equipment, route and the jurisdictions involved.

ROUTE INFORMATION

Origin:_ _____________________________________________________________________ Destination:_ ________________________________________________________________ States/provinces crossed:______________________________________________________

KNOWN CONCERNS

F Oversized width F Oversized height F Heavy / overweight F Rural access

F Restricted bridge F Low clearance F Seasonal road restriction

F Cross-border transportation F Permit requirements expected F Escort requirements expected

F Other:____________________________________________

DON’T ASSUME THE LAST MOVE DETERMINES THE NEXT ONE

Two machines that look similar may differ in:

• Configuration • Attachments • Dimensions • Weight • Trailer • Route

Evaluate the transportation requirements for the actual move.

PLAN AROUND THE AGRICULTURAL CALENDAR

Step 12: Communicate the Deadline Behind the Delivery Date Agriculture operates around windows that transportation providers need to understand. A machine arriving one day late may have very different consequences depending on why it is moving.

THIS DELIVERY SUPPORTS:

F Planting F Harvest F Tillage F Equipment repair F Rental/lease F Irrigation F Other:______________________________________________________________ F Equipment sale F Auction purchase F Dealer transfer F Spraying F Application F Livestock operation

SCHEDULE

Equipment ready date: _____________________________________ Earliest pickup: _____________________________________

Required delivery date: _____________________________________ Required delivery window: _____________________________________

WHAT MILESTONE DEPENDS ON THIS DELIVERY?

____________________________________________________________________________ ____________________________________________________________________________ _ __________________________________________________________________________

WHAT HAPPENS IF THE MACHINE ARRIVES LATE?

F Planting delayed F Harvest delayed F Application window affected F Crew waits

F Replacement/rental equipment needed F Dealer/customer commitment affected

F Auction deadline affected F Repair schedule affected

TELL THE TRANSPORTATION PROVIDER THE REAL DEADLINE F Other:_________________________________________________________

“Deliver Friday” provides a date. “Machine must be operating Saturday morning for harvest” provides context. That context can matter when transportation decisions need to be made.

DEALER, AUCTION AND EQUIPMENT-PURCHASE MOVES Step 13: Verify the Details Before Arranging Pickup When purchasing equipment from a dealer, auction or private seller, the transportation requester may not be physically present with the machine. That makes verification even more important. BEFORE REQUESTING TRANSPORTATION, CONFIRM:

F Exact manufacturer/model F Actual machine location F Pickup contact F Pickup hours F Release requirements F Equipment paid/released for pickup F Actual dimensions

F Actual weight F Attachments included

F Machine operating condition F Loading assistance available F Pickup appointment requirement F Photos available

ASK THE SELLER OR AUCTION FACILITY

Will someone be available to operate the machine? F Yes F No Is loading assistance available? F Yes F No

Are attachments stored separately? F Yes F No Are there specific pickup deadlines? F Yes F No Pickup deadline:_______________________

DON’T BOOK FROM THE LISTING ALONE

Online listings and auction descriptions can be helpful starting points. Transportation should still be based on verified machine information whenever possible.

MULTIPLE MACHINES AND FLEET MOVES Step 14: Turn Multiple Loads Into One Transportation Plan

Moving several tractors, machines or pieces of equipment should be managed as a coordinated project. Do not simply treat these as unrelated individual shipments.

EQUIPMENT REGISTER

Required Delivery Date

Machinery

Model

Dimensions

Weight

Attachments

MULTI-LOAD PLANNING CHECK

F Complete equipment list available F Dimensions verified for each machine F Weights verified

F Pickup sequence established F Delivery sequence established F Site can handle multiple trucks F Operators available F Central point of contact established

F Attachments identified F Trailer needs evaluated

WHICH MACHINERY IS MOST CRITICAL?

____________________________________________________________________________

WHICH MACHINERY MUST ARRIVE FIRST?

CAN MULTIPLE TRUCKS ARRIVE SIMULTANEOUSLY? ____________________________________________________________________________ F Yes F No Maximum trucks onsite: ____________________________________________________________________________

10 DETAILS THAT CAN DELAY YOUR AG EQUIPMENT MOVE Match Them Before Dispatch 1.Using The Wrong Dimensions Manufacturer specifications may not reflect attachments, tires, tracks or modifications. 2.Not Including The Header Or Implement The machine may be only part of the total shipment. 3.Guessing The Weight Transportation equipment and routing decisions may depend on accurate weight information as it is part of the equipment selection process. 4.Not Disclosing That The Machine Doesn’t Run Non-running equipment can require different loading resources. 5.Forgetting About Duals, Tracks Or Attachments Configuration affects the transportation profile. 6.Assuming The Farm Entrance Is Large Enough A large trailer may need considerably more room than normal farm traffic. 7.Not Checking Ground Conditions Soft, muddy or uneven ground can affect access to loading and unloading locations. 8.Waiting Too Long To Plan A Seasonal Move Planting and harvest deadlines don’t move just because transportation became difficult. 9.Using An Auction Listing As The Only Source Of Information Verify the actual machine before finalizing transportation. 10.Not Explaining The Real Delivery Deadline A transportation provider should understand when the machinery actually needs to be operational to optimize delivery. Important Planning Note This toolkit is intended as a general transportation-planning resource. Equipment preparation, loading, securement, trailer selection, routing, permitting, escort, regulatory and site requirements vary based on the specific machine, transportation equipment, carrier, route and jurisdiction. Applicable manufacturer instructions and shipment-specific transportation requirements should be evaluated before the equi pment moves.

AGRICULTURAL EQUIPMENT PRE-MOVE CHECKLIST

Before You Request Transportation

MACHINERY

F Manufacturer/model confirmed F Exact length confirmed F Exact width confirmed

F Exact height confirmed F Weight verified F Ground clearance known

F Operating condition are confirmed F Photos available

ATTACHMENTS

F All attachments identified F Separate dimensions recorded F Separate weights recorded

F Transportation configuration has been determined F Additional trucks identified if needed

LOADING

F Loading method confirmed F Operator available

F Loading equipment available F Pickup access reviewed

F Pickup appointment has been confirmed

UNLOADING

F Delivery appointment confirmed F Destination access reviewed

F Operator will be available

F Unloading method confirmed F Unloading equipment available

TRANSPORTATION

F Trailer needs evaluated F Oversize considerations identified F Route concerns communicated

F Permit considerations identified where applicable F Escort considerations identified where applicable

SCHEDULE

F Equipment ready date confirmed F Pickup window confirmed

F Required delivery date confirmed F Seasonal/operational deadline communicated

SCHEDULING WORKSHEET

Ready date:___________________________ Required delivery:_____________________

Operational/seasonal milestone: _____________________________________

Is weekend or after-hours delivery an option or a possibility? F Yes F No F Unknown What happens if the shipment arrives late? Instructions?_ _________________________ ____________________________________________________________________________

AGRICULTURAL EQUIPMENT TRANSPORT WORKSHEET

EQUIPMENT AND DIMENSIONS Complete This Before Requesting a Transportation Quote

Equipment type:_ _____________________ Manufacturer:_________________________ Model:____________ Quantity:_________ Machine operational? F Yes F No

Length:_ __________ Width:_ ___________

Height:____________ Weight:_ __________

Ground clearance:_ ____________________ _____________________________________

CONFIGURATION / ATTACHMENTS / ADDITIONAL PIECES

F Tires F Dual tires

F Tracks F Attachments

F Implements F Header

Attachments / Additional Pieces:_ ______________________________________________ ____________________________________________________________________________ F Other:__________________________

ORIGIN

City / State / Province: _____________________________________ Facility / Farm / Dealer / Auction: _____________________________________

Loading method: _____________________________________ Access concerns: _____________________________________ Unloading method: _____________________________________ Access concerns: _____________________________________

DESTINATION

City / State / Province: _____________________________________ Facility / Farm / Dealer / Site: _____________________________________

SPECIAL REQUIREMENTS

F Multiple trucks F Oversized F Specialized trailer

F Heavy / overweight F Non-running equipment

F Crane F Winch

F Expedited F Cross-border

F Yes F No F Other:________________________________________

PHOTOS AVAILABLE?

TRANSPORT SUPPORT FOR AG EQUIPMENT AND MACHINERY Start With the Machine Details Before Building the Transportation Plan. Buchanan Logistics coordinates transportation for agricultural equipment and machinery throughout North America. Our team has experience supporting transportation for equipment such as:

• Tractors • Combines • Sprayers

• Balers • Fertilizer spreaders • Attachments

• Implements • Other agricultural types of machinery

Depending on the machine’s dimensions, weight, configuration and loading requirements, transportation may involve flatbed, step deck, removable gooseneck or other specialized equipment. Buchanan can also coordinate transportation requirements involving oversized equipment, heavy-haul freight, multiple loads, expedited schedules and project transportation.

BUCHANAN LOGISTICS OFFICE LOCATIONS

INDIANA

5130 Executive Blvd., Fort Wayne, IN 46808 (Corporate Office)

11611 N. Meridian St., Carmel, IN 46032

ARIZONA 3707 E. Southern Ave., Office 2005 Mesa, AZ 85206 MICHIGAN 1717 Ridgewood Dr., Suite 101 Midland, MI 48642

ARKANSAS 811 N Dixieland Rd., Rogers, AR 72756 MISSOURI 9601 NE Barry Rd., Suite 220 Kansas City, MO 64158 TENNESSEE 2525-A Lebanon Pike., Suite 4 and 5 Nashville, TN 37214

MASSACHUSETTS 98 Lower Westfield Rd., Suite 111 Holyoke, MA 01040 PENNSYLVANIA 1200 Commerce Circle Trafford, PA 15085

SOUTH CAROLINA 5 Century Dr., Suite 240 Greenville, SC 29607

TEXAS 17630 Beaumont Hwy., Houston TX, 77049

READY TO DISCUSS YOUR NEXT MOVE?

Send Buchanan:

1.Equipment make and model 2.Exact shipping dimensions 3.Verified weight 4.Attachments or implements

5.Current photos 6.Pickup and delivery locations 7.Loading and unloading methods 8.Required dates

REQUEST AN AG EQUIPMENT TRANSPORT REVIEW

Buchanan Logistics, Inc. www.BuchananLogistics.com 1-866-660-7091

ABOUT BUCHANAN LOGISTICS

Buchanan Logistics provides freight brokerage and transportation coordination for businesses moving standard, oversized, heavy and specialized freight throughout the United States, Canada and Mexico. From a single piece of machinery to recurring transportation requirements and multi-load projects, Buchanan builds transportation plans around the freight, equipment, schedule and delivery requirements. When the machine matters to the operation, the transportation plan matters too.

Ð 2019 National Interstate Insurance One Million Safe Miles Award Ð 2020 BCP Transportation Freight Brokerage Business Integrity Award Ð 2020 Trucker Tools 80% and Higher Visibility Compliance Champion Ð 2020 Armstrong & Associates’ Report of Top 100 List for Digital Freight Matching (Armstrong & Associates) Ð 2021 & 2020 Penske Logistics Flatbed Service Provider Award Ð 2021, 2020 & 2019 Top 50 Dedicated Contract Carriers (ttnews.com) Ð 2022 Diamond Trucker Tools Partner Award for Most Loads Tracked (Nominated) Ð 2023, 2022, & 2020 Schneider Flatbed Carrier of the Year Award Ð 2023 Clutch Top Shipping Companies in Indiana Ð 2023 Top 10 Flatbed Trucking Service Providers (The Logistics Transportation Review) Ð 2023 & 2022 Freightwaves Top 500 For-Hire Carriers (FreightWaves)

Ð 2023 ABC Supply’s Southwest Region Carrier of the Year Ð 2023 Isometric Technologies (ISO) Retailer Service Winner Ð 2025 CarrierSource Top Carriers for 2025 (CarrierSource) Ð 2026 A&A’s Top 100 Domestic Transportation Management (DTM) 3PLs List (Armstrong & Associates) Ð 2026, 2025, 2022, 2021, 2020, & 2019 Top 100 Freight Brokerage Firms (ttnews.com)

5130 Executive Blvd. • Fort Wayne, IN 46808 260.471.1877 • www.buchananlogistics.com

© 2026 Buchanan Logistics

bl-ag-farm-guide_v1.1

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22

Made with FlippingBook - Share PDF online