4.2.2 Butted frame joint
When connecting frame rails without mitering, i.e. butted joints, proceed as you normally would. This example shows another option for using the DOMINO joining machine on the workpiece.
1
2
Set the routing height to match the thickness of your workpiece. For the routing depth, select half the domino length. Route both mortises using the tight setting for a precise fit or route the second mortise with clearance for adjustment, if needed.
The routed mortises can be set by marking them out as usual or using the stop system with the scale in the viewing window – in this example, 15 mm from the outside edge. For this option, place the scale with the 15 mm marking at the edge of the workpiece.
46
Made with FlippingBook - Online catalogs