4
3
4
The second mortise is set here using the indexing stop. This method makes it possible to position two dominos next to each other working from just one reference edge. TIP When using the indexing stops, the edge of the workpiece can be seen in the triangular viewing window of the DOMINO joining machine.
Use this method to carry out routing for all four frame rails.
5
Then glue the frame rail and brace with pads and clamps, if necessary.
TIP If the frame rail needs to be rebated or grooved, the rebating depth must be added in advance when routing the domino mortises, so that the domino is centered later despite the rebate (which then takes up part of the depth of the domino mortise).
47
Made with FlippingBook - Online catalogs