DOMINO Joinery System booklet




Mount the trim stop onto the DOMINO joining machine according to the operating instructions.

Set the width of the trim stop to the thickness of your spindle by adjusting the guide in the parallel side fence to the correct dimension using the scale and the green rotary wheels. In this example, we are working with 30 x 30 mm rectangular spindles.



Using the spindle as a guide, ensure that the trim stop dimension fits perfectly; make further adjustments if necessary.

To process a 6 x 40 mm domino as in this example, use the 6 mm cutter (6 mm dominos can only be processed with the DF 500). For details on changing the router, see chapter 1.4.4, page 18.


Made with FlippingBook - Online catalogs