4.7 Mitered joints
Mitered joints are not just possible for smaller workpieces and frames – naturally they can also be used for more stable connections of solid workpieces thanks to the DF 700. The following example uses a bench to show how these types of joints are quickly and easily created using the DOMINO locating pins of the DF 700.
Our workpiece is 30 mm thick. We will be using 8 x 40mm tenons. The miter angle is 45°. This requires the following settings on the Domino: adjust the mortise height to the lowest setting, 10 mm. The mortise angle is 45° and the mortise depth is half of the domino length, i.e. 20 mm.
1
74
Made with FlippingBook - Online catalogs