4
5
6
For the other mortises, set the desired mortise distance on the cross stop and position the pin in the first mortise.
Use the same process to create the mortises for the side wall of the cabinet. Set the first mortise with the indexing stop of the Domino.
7
8
... and create the others using the cross stop pins. Using the additional stop, along with the cross stop – is beneficial here, because the Domino has a sturdy support surface on the panel.
Then create the mortises for the shelves (this process is similar for carcass sides etc).
Place both side parts on top of each other and mark out the position where the center shelf will be. Mark the top and bottom edge of the shelf (material thickness), not the center.
81
Made with FlippingBook - Online catalogs