VMU System Diagram
VMU
C-mount compatible analog camera or digital camera
Third-party YAG lasers* 5
Fixed-magnification monitoring camera mount ( 378-087 ) P.13* 4
2X TV adapter unit ( 378-703 )
0.5X TV adapter unit * 1 ( 378-704 ) P.13
VMU-V/H ( 378-505/378-506 )
VMU-LB/L4B ( 378-513/378-514 )
Focusing unit A ( 378-705 ) P.13
Focusing unit B* 2 ( 378-706 ) P.13
Polarizer (B) ( 378-715 ) P.13
Simple stand ( 378-730 ) P.25
Manual revolver nosepiece unit (for BF)* 2 ( 378-707 ) ( 378-717 ) P.12 Quad
Polarizer ( 378-710 ) P.13
Self-aligning power revolver nosepiece unit (for BF) * 3 ( 378-713 ) P.12
Transmitted light unit ( 378-736 ) P.25
LED adapter (02AVB662) P.13
Quintuple
LED spot illumination from various manufacturers
Objectives M Plan Apo series (for observation): All types on P.26 to 28 G Plan Apo series (for observation): All types on P.28 NIR series on P.30 to 31 (for fundamental/second harmonic laser machining) (for near-infrared observation) NUV series on P.32 to 33 (for second/third harmonic laser machining) UV series on P.34 to 35 (for second/fourth harmonic laser machining)
Third-party motorized X-Y stages (50×50 mm)* 6
Fiber-optic illumination unit 150 W ( 176-316 )
X-Y stage (50×50 mm) ( 378-020 )
Fiber illumination unit (LED) ( 176-386 )
P.25
P.25
*3: This revolver nosepiece unit cannot be used with focusing unit B ( 378-706 ). For details on mounting position, refer to the figures on page 14. *4: Use this mount when mounting a C-mount camera using the laser port. Use this mount for 2/3-inchor smaller cameras. *5: Mitutoyo does not handle these lasers. Consult Mitutoyo for more information. *6: An adapter may be required when mounting any of these stages. Consult Mitutoyo for more information.
*1: Compatible with 1/2-inch or less C-mount cameras. *2: Use focusing unit B ( 378-706 ) if the distance between the mounting position and VMU main unit isdesired to be as small as possible. If the manual revolver nosepiece unit ( 378- 707 ) is used concurrently, mount the unit in front of the VMU main unit. For details on mounting position, refer to the figures on page 14.
10
Made with FlippingBook. PDF to flipbook with ease