Dimensions of Optional Accessories for VMU
Manual revolver
Bright-field revolver (378-707/378-717)
Bright-field revolver (378-724)
MAX 130* MAX 130*
MAX 78* MAX 78*
MAX 130 76.5
MAX 78
76.5 76.5
27
27
27
27
27
Single mount unit
Mount unit Mount unit
Workpiece surface Workpiece surface
Workpiece surface Workpiece surface
* Where M Plan Apo HR100X ( 378-815-4 ) is used * Where M Plan Apo HR100X ( 378-815-4 ) is used
When mounting the revolver on VMU-V or VMU-H Note 1: The lens mount must be removed from VMU. Note 2: The orientation of the revolver can be freely set to the mounting surface.
Note 1: Revolver is installed by removing the single mount unit, but the distance between the mounting position of WIDE VMU main unit and the stage is unchanged. Note 2: Revolver mounting direction is limited to the direction indicated in the figure above.
MAX 77* MAX 77*
MAX 126* 78 MAX 126* 78
Bright/dark-field revolver (378-725)
108 108
MAX 132
MAX 81
27
76.5
27
27
27
27
Intermediate lens tube Intermediate lens tube
Mount unit Mount unit
Single mount unit
Workpiece surface Workpiece surface
Workpiece surface Workpiece surface
* Where M Plan Apo NIR HR100X ( 378-864-5 ) is used * Where M Plan Apo NIR HR100X ( 378-864-5 ) is used
When mounting the revolver on VMU-LB or VMU-L4B Note 1: The middle optical tube and lens mount must be removed from VMU. Note 2: The orientation of the revolver can be freely set to the mounting surface.
Note 1: Revolver is installed by removing the single mount unit, but the distance between the mounting position of WIDE VMU main unit and the stage is unchanged. Note 2: Revolver mounting direction is limited to the direction indicated in the figure above.
Power revolver
Bright-field power revolver (378-713)
Bright-field power revolver (378-726)
MAX 130 87
MAX 78
27
M20×0.5
27
Single mount unit
Workpiece surface Workpiece surface
88.6 88.6
136
87
Workpiece surface Workpiece surface
MAX130*
MAX78*
Note 1: Revolver is installed by removing the single mount unit, but the distance between the mounting position of WIDE VMU main unit and the stage is unchanged. Note 2: Revolver mounting direction is limited to the direction indicated in the figure above.
* Where M Plan Apo HR100X ( 378-815-4 ) is used * Where ( 378-815-4 ) is used
When mounting the revolver on VMU-V or VMU-H Note 1: The lens mount must be removed from VMU. Note 2: The orientation of the revolver can be freely set to the mounting surface.
Bright/dark-field power revolver (378-727)
MAX 132
MAX 80
88
27
27
M20×0.5
27
Mount unit Mount unit Intermediate lens tube Intermediate lens tube
Workpiece surface Workpiece surface
Single mount unit
Workpiece surface Workpiece surface
88.6 88.6
136
87
MAX126*
MAX77*
* Where M Plan Apo NIR HR100X ( 378-864-5 ) is used * Where ( 378-864-5 ) is used
When mounting the revolver on VMU-LB or VMU-L4B Note 1: The middle optical tube and lens mount must be removed from VMU. Note 2: The orientation of the revolver can be freely set to the mounting surface.
Note 1: Revolver is installed by removing the single mount unit, but the distance between the mounting position of WIDE VMU main unit and the stage is unchanged. Note 2: Revolver mounting direction is limited to the direction indicated in the figure above.
14
Made with FlippingBook. PDF to flipbook with ease