Our Stand-alone Micro-Hydro can stand on its own and able to produce any amount of energy as it designed for.
The system is simple as described in Wikipedia as pump hydro. There is mathematics in this that needs to be abide - power in and power out minus lost in transmission is the well-known factor. We use small amounts of energy to produce more energy and take advantage of the kinetic energy of water To make it simple in this resume, we use from 22% to 28% of the total power produced to have the 100% outcome from the main generator. We drop the water from a minimum height of 15 meters and at an angle of 35 degrees. The water run along a pipe size dimensioned to the speci cations for the outcome. The pipes have small impellers along with it to produce DC power to storage. When the water hits the main Pelton turbine, the turbine will rotate. The rotations go to the generator that produces AC power into either a synchronizer or controller, transformer and then to the grid. The synchronizer or controller use to make sure the HZ, AMP, and voltage are the required speci cations.
SYSTEM WORLD for the
The water reaches in the upper reservoir after leaving the main turbine Pelton. From here it will be guided to the 4 + 2 meter Pryter impeller gate system, before sending it back to the top reservoir at 15 meters up.
The Pryter Impleller gate system is only for the power to return to the pump systems. It is when 22% to 28% of the power produced is used back to push the water back into the reservoir for the next cycle. It also acts as the backup system when needed if there is a break down to the system. On the other hand, the Stand-alone Micro-hydro system has a lot of components. The main parts of the system are the AC generators and AC pumps, metal pipes in a various dimension and length; Pelton and Pryter impeller are the key part of the system. Size of the pipes matches the head and water speed. Control unit is custom made depends to project. H beam and ankle iron are 80% of the system's structure which can be recycled easily.
Made with FlippingBook - professional solution for displaying marketing and sales documents online