COMMERCIAL PLUMBING & HEATING
De Dietrich wall hung condensing boilers
De Dietrich AMC 35/45/65/90/115/160 range of wall-hung commercial condensing boilers is equipped to operate on natural gas and can be converted to propane. With minimum floor space for maximum output, the Innovens Pro AMC is a high- technology, wall-hung gas condensing boiler that offers a boiler output range of 7.0 kW to 161.5kW, optimised for energy savings and ecology. A system that is complete, flexible
and intelligent, the Innovens Pro AMC can be customised to provide domestic hot water output at high levels of comfort, or installed within a complete hydraulic cascade system to connect 2-10 boilers to offer an output of over 1,292kW. Cascade kit: AMC 45 to 115 cascade systems are available in 3 versions: • LW: for wall-hung alignment of the boilers • LV: for floor-standing alignment of the boilers • RG: for back to back assembly of the boilers
Hamworthy Stratton Suitable for use with natural gas and LPG, the new Stratton mk2 wall hung condensing boiler can be specified for a multitude of commercial wall hung boiler applications. Six models with outputs from 40kW to 120kW are available while a 5:1 turndown ratio per boiler module means any changes in system load are accurately matched. This minimises boiler cycling and wastage of energy. Outstanding efficiency in excess of 108% nett keeps operating costs to a minimum, and the pre-mix burner technology gives clean operation with ErP Class 6 NOx emissions. The boiler is protected from operating during adverse system conditions thanks to built-in monitoring of low water pressure and flow rate. The Stratton mk2 wall hung boiler can be installed with both room sealed and open flue arrangements. Designed for sealed and pressurised systems only, the hydraulic installation can be fast tracked using factory manufactured frame and header kits that include boiler pumps for up to four boilers.
AGUAdens T Series Floor Standing Water Heaters
AGUAdens T from 100 to 280kW is the new range of floor-standing modulating commercial gas
is composed of 1 to 4 RVC 70 kW heat exchangers - a ‘monoblock’ system that
optimises the supplied output according to real DHW needs ensuring maximum efficiency. • AISI 316 Ti (Titanium) Stainless Steel Heat Exchanger - The only primary heat exchanger able to work in direct contact with chlorinated mains water. • Ecologic premix burner - The whole range of commercial water heaters is equipped with ecologic premix burners made of Fecralloy metal fibre. • Maximum efficiency even with small flows - Two-way motorised valves are available among accessories. They allow high seasonal efficiency in systems characterised.
condensing water heaters, completely patented and assembled by Cosmogas, offering: • Innovative design - Thanks to their vertical structure they save space in both new and to renovate thermal power plants. They supply water in continuous up to 140 l/min ( t 30°C) with a condensing output up to 294kW. Thanks to their lightness they are easy to carry and place inside thermal power plants. • Monoblock modularity and continuity - Each commercial water heater
• Muirfield Drive, Naas Road, Dublin 12 - T: (RoI) 01 419 1919 or (NI) 00353 1 419 1919 • Unit 1 Furry Park Industrial Estate, Dublin 9 - T: (RoI) 01 842 7037 or (NI) 00353 1 842 7037 • South Ring West Business Park, Tramore Road, Cork - T: (RoI) 021 432 1066 or (NI) 00353 21 432 1066 E: info@hevac.ie - W: www.hevac.ie
FOLLOW US ON:
www.plumbingmag.com
PLUMBING & HEATING MAGAZINE | 31
Made with FlippingBook - professional solution for displaying marketing and sales documents online