AF 94
MUD ® Mold Base Adapter System
Prior to installation
Just as in the case of the companion ear plates, the installation of a MUD®
Quick-Change adapter frame is a simple procedure. Once installed, a single
adapter frame will accommodate an unlimited number of standard mold
bases.
Preparation
Before installing Master Unit Die Quick-Change adapter frame, thoroughly
clean and wipe down the molding machine platen. Inspect for rust build-up
and high spots. Be sure all platen surfaces are flat. Also, inspect the MUD®
adapter frame plates for foreign matter and high spots (400 grit stone is
recommended for removing high spots).
After the platens and MUD® adapter frame plates are cleaned and free of
burrs, spray the surfaces with a high quality mold protection. This aids in
preventing build-up between plat-
ens and the MUD® adapter frame
system.
ALWAYS check the ear plates for
burrs and nicks, stoning or filing as
required. Lubricate the slide areas
of the ear plate and adapter frame
surfaces to extend their life and to
allow surfaces to slide more freely.
U.S. 800-626-6653 ■ dme.net • store.dme.net Canada 800-387-6600 ■ Mexico 52-442-713-5666
Made with FlippingBook - professional solution for displaying marketing and sales documents online