PAPER making! FROM THE PUBLISHERS OF PAPER TECHNOLOGY INTERNATIONAL ® Volume 12, Number 2, 2026
WOOD PANEL “Acoustic Absorption Behavior of Boards Made from Multilayer Packaging Waste”, Miron Rancea, Ovidiu Nemeș, Ancuța -Elena Tiuc & Ovidiu Vasile, Appl. Sci. 2026, 16(3), 1206. The increasing amount of multilayer packaging waste poses significant environmental challenges and calls for sustainable valorization solutions. This study aimed to investigate the acoustic properties of composite materials produced by hot-pressing multilayer waste without the addition of binders or other substances. The waste was carefully cleaned and shredded into square or strip-like geometries, and the composite material plates were compressed at different temperatures (120°C, 125°C, 130°C, 135°C, and 140°C) under a constant pressure of 5MPa. The sound absorption coefficients were evaluated for representative samples, with results analyzed as a function of constituent geometry and processing temperature. Experimental results indicate that the pressing temperature critically affects the internal structure of the material, while waste shape exhibits a frequency-dependent influence on the absorption coefficient. The resulting composite materials display low porosity, which limits internal sound absorption and promotes sound wave reflection, indicating that these materials are more suitable for sound insulation rather than acoustic absorption. These results highlight the potential of multilayer packaging waste- based composites as a sustainable solution for noise control applications and highlight the importance of processing parameters in tailoring their acoustic performance. “ Valorisation of waste OSB into sustainable mycelium-based composites for insulation applications ” , Joni Wildman, Valeria Cascione, Daniel Henk, Pete Walker & Andrew Shea, Scientific Reports (2026), published online 13 May 2026. The need for the construction industry to reduce its contribution to landfill waste and greenhouse gas emissions is urgent, with engineered wood products such as oriented strand board (OSB) representing a complex and difficult-to-recycle waste stream. As the demand for construction materials increases, it is important to address end-of-life challenges for OSB. Mycelium-based composites (MBCs) offer a promising solution by repurposing waste materials into sustainable products. MBCs are a class of bio-based material made from the colonisation of fungal mycelium on organic substrates, often agricultural or paper waste. MBCs can provide an environmentally friendly end-of-life pathway for waste but also serve as effective insulation materials that can be sustainable alternatives to conventional insulation solutions. Here, MBCs are successfully produced using waste OSB and Trametes versicolor mycelium. The mycelium successfully colonised and bound the OSB substrate, forming that retained their shape after demoulding and drying. Thermal characterisation of the OSB-based MBCs showed a mean thermal conductivity of λ = 0.0415 ± 0.001 W/mK, comparable to conventional insulation materials. Importantly, this approach opens up the possibility of including diverse materials as MBC substrates depending on local waste availability and waste challenges. A life cycle assessment (LCA) of the lab-scale production process was conducted to identify key areas of the production process that contribute to environmental impact, with drying being the most energy-intensive stage. The global warming potential (GWP) of OSB-based MBCs was found to be 0.1021kg CO 2 eq per 1kg of material, lower than conventional insulation materials such as EPS, XPS, and rockwool, and comparable to other MBCs made with alternative substrates. This work highlights the potential of valorising engineered wood waste, such as OSB, through the production of mycelium-based composites. By transforming construction waste into sustainable insulation materials, this study contributes to circular economy practices in the construction industry and supports efforts to reduce environmental impacts.
Page 12 of 13
Technical Abstracts
Made with FlippingBook Online newsletter maker