PAPERmaking! Vol12 Nr2 2026

PAPER making! FROM THE PUBLISHERS OF PAPER TECHNOLOGY INTERNATIONAL ® Volume 12, Number 2, 2026

“Investigation of specimen shape and size effect on the in -plane tensile mechanical properties of unidirectional strand board (USB) and oriented strand board/4 (OSB/4)”, Ahmadreza Ghazanfari, Lukas Malzl, Maximilian Pramreiter, Matthias Braun, Simon Lux, Johannes Konnerth & Benjamin Kromoser, Wood Material Science & Engineering , Published online 17 Apr 2026. Strand-based engineered wood products combine high resource efficiency with good mechanical performance. Unidirectional strand board (USB) features str ands parallel to the panel’s length, while oriented strand board (OSB/4) has a cross-oriented layup. Understanding their tensile behavior is essential for structural applications, where in-plane tension frequently dictates load-bearing limits. However, large-scale testing guidelines, especially suitable specimen size or shape, remain limited. This exploratory study evaluated tensile properties of USB and OSB/4 using three rectangular specimen sizes (1,200 × 250mm, 960 × 100mm, 800 × 75mm) to assess size effects, and an additional dog-bone OSB/4 group to examine shape effects. USB showed mean modulus of elasticity (MOE) of 8,297 – 8,762MPa and Ultimate Tensile Strength (UTS) of 26.8 – 30.0MPa, while OSB/4 reached MOE of 4,230 – 4,617MPa and UTS of 13.4 – 14.6 MPa. Statistical analysis isolated size and shape effects from inherent material variability. For USB, a significant UTS size effect was observed: the intermediate specimen (960 × 100mm) achieved strength comparable to the largest size, proving most efficient. OSB/4 showed no differences between rectangular and dog-bone specimens, confirming rectangular shapes are sufficient. These results indicate trends for optimizing geometries, providing a preliminary basis for future large-scale research toward EN 789 standardization. “Analysis of the source of abnormal odor components in medium -density fiberboard (MDF)”, Xuefeng Xing, Shifei Kang, Shanming Li & Minxian Luo, Wood Material Science & Engineering , 476-483. To investigate the cause of the abnormal odor emitted by medium-density fiberboard (MDF) when formaldehyde-free diphenylmethane diisocyanate (MDI) adhesive is used, a comparative study of three types of MDF was conducted: MDF made with masson pine wood and MDI adhesive (PW-MDI), MDF made with masson pine wood and urea-formaldehyde resin (PW-UF), and MDF made with mixed hardwoods and MDI adhesive (HW-MDI). Volatile organic compounds (VOCs) emitted were collected and analyzed using gas chromatography-mass spectrometry (GC-MS), identifying 86 VOCs. Results reveal that the PW-MDI specimen contains a higher concentration of acid substances, comprising 56% of the specimen. These acid mainly octanoic and nonanoic acids, were the primary contributors to its abnormal odor. In contrast, the PW-UF and HW- MDI specimens were predominantly composed of alcohol substances, accounting for 33% and 36% respectively. Gas chromatography-ion mobility spectrometry (GC-IMS) was used to obtain VOC fingerprints. Analysis revealed that acids and aldehydes are the primary contributors to the relative odor activity value (ROAV). These compounds are known for their abnormal odor that impact the indoor air quality. This research successfully identified the source of the abnormal odor and provided technical support for the effective control of low abnormal odor VOC emissions from MDF.

Page 13 of 13

Technical Abstracts

Made with FlippingBook Online newsletter maker