PAPERmaking! Vol12 Nr2 2026

2

J Renew Mater. 2025

and the Single-Use Plastics Directive [5], emphasize the reduction of synthetic polymer consumption while encouraging the development of bio-based and biodegradable alternatives from renewable sources. In addi- tion to regulatory actions, scientific and technological advancements have contributed to the feasibility of renewable materials in industrial applications [6,7]. Simultaneously, consumer demand for environmentally friendly products has pressured industries to integrate sustainable materials into their production processes. Sustainable materials are designed to minimize environmental impact throughout their lifecycle, from production to disposal. They are primarily made from renewable resources, such as plant-based fibers, biodegradable polymers, and recycled materials, ensuring a reduced dependence on finite fossil fuels [8]. Biocomposites are composed of more than one component utilizing the interaction to ensure and improve the properties of the obtained materials [9]. Mycelium biocomposites (MB) are innovative, sustainable materials derived from the fungal hyphae —filamentous, thread-like structures that form the mycelium, the primary vegetative body of a fungus. The majority of fungal species employed in MB belong to white-rot fungi from the phylum Basidiomycota. White- rot fungi are the most efficient and versatile degraders of lignocellulosic biomass, owing to their ability to secrete a broad range of hydrolytic and oxidative enzymes [10], which efficiently mineralize lignin in addition to the wood polysaccharides to CO 2 andH 2 O [11]. These biocomposites are produced through the cultivation of mycelium on organic substrates, mostly lignocellulosic waste, where the fungal network grows and binds the substrate into a solid structure [12]. Due to their biodegradability [13], lightweight properties, and potential for customization, mycelium-based materials have gained attention in various industries, including packaging [14], construction [15,16] and textiles [17] as eco-friendly alternatives to conventional synthetic materials. The unique ability of mycelium to interact with bio-based substrates and form durable, versatile materials position it as a promising solution in the transition toward a more sustainable economy in the field of renewable materials [14]. Various cellulose-containing raw materials can be used as substrates for MB [18]. Cellulose fibers are known as multiple-use recyclable raw material from a renewable primary source, such as wood or other lignocellulosic plants. The current paper fiber recycling rate in Europe is 79.3% which means that most of the used paper and board was recycled, and every fiber completes on average 4.8 recycling cycles [19] while the theoretical number of recycling reaches 25 [20]. Recycled fibers are mainly used to re-create newsprint and packaging materials, as well as to develop innovative composite materials such as reinforced cement materials [21,22], high-density polyethylene (HDPE) composites [23], high-strength foam materials [24], superabsorbents [25], polyurethane elastomer composites [26], polypropylene composites [27]. However, large amounts of secondary fibers are used to form three-dimensional shaped molded fiber products for different applications, such as electronic packaging, specialty items, and food packaging [28,29], which can be further recycled in new packaging or used for more advanced applications, e.g., as a nanocellulose source for active food packaging [30]. According to Eurostat, the EU generates around 84 million tons of packaging waste in a year, with paper and cardboard accounting for over 40% [31]. Since most egg cartons are made from molded fiber derived from recycled paper, they represent a relevant portion of this category. For example, in Germany alone, it is estimated that approximately one billion egg cartons are used each year [32]. Given that a typical fiber carton weighs around 45–50 g, this results in roughly 45,000 to 50,000 t of packaging material annually in just one country. Across Europe, the total volume is undoubtedly higher, making egg packaging an important stream in discussions on waste reduction and material sustainability. Despite extensive research on recycling and upcycling of molded fiber product waste, no existing studies have specifically addressed its application as a substrate for MB. The proposed study aims to fill the detected gap by developing MB using molded fiber-based egg packaging waste (EPW) as substrate.

Made with FlippingBook Online newsletter maker