INSPECTION EVERY 5000 MILES King Pin Alignment……………………………………………………Check for proper alignment Brakes………………………………………………………………………..…….………Adjust as needed Wiring…………………………....Check for chafed or broken wires, ground wire connecƟons, loose wire retaining clips and dielectric grease Upper 5th Wheel…………………………………………………………………..………………..Lubricate Suspension…………………………………….……………………...Check for proper bolt torque Piping………………………………….………Check all piping supports-Ɵghten if necessary AeraƟon……………………………………Check all aeraƟon tee bolts - hand Ɵghten only EVERY 10,000 TO 25,000 MILES Wheel Bearings………………………………….Verify proper end play and adjust as necessary Brakes………………………………………………..Inspect linings, free-up brake shoes and anchor pins EVERY TWO YEARS AeraƟon…………….…………………………….Inspect and replace aeraƟon components as necessary. At a minimum, trailers in abrasive product service should be inspected every six months. A recommended lubricaƟon chart is provided on the following page of this manual.
29
Made with FlippingBook Annual report maker