Sept 2020 OSHINO_LEDsForSigns_E_brochure


short form data

LED mini - dim - flash 30W

12 & 24V inline dimmer & flasher unit


LED mini - dim - flash is a simple, reliable and economical to use, inline PWM dimmer & flasher module is and supplied with flying - leads for a simple ’ inline ’ connection. Two versions are available 1) with remote handset and 2) with dimmer/flasher module only. Both comprise user controls of both brightness and flashing modes. Using the remote handset, via the Mode + and Mode - buttons the user can adjust brightness or flashing functions. Access pre - set brightness levels 100, 50 and 25% or in smaller steps via Bright + & Bright -

1) LMD1 version supplied with a remote control handset

buttons. In flashing mode, the user can select the rate or flash via Speed - and Speed + buttons. In the event of temporary power - off / power failure, LED mini - dim - flash recalls the last selected setting and re- sumes the brightness / flash rate program.

12V & 24V depending on driver voltage

Dimming method: Pulse Width Modulation

2.5A @ 12V or 1.25A @ 24V: 30W max power

Two versions: 1) remote control + inline module and

2) inline dimmer flasher module only

Module is weather resistant

Simple installation & inline connection

Remote handset: 1pce CR2032 ‘ coin ’ battery

2) LMD2 module only with push - buttons


Low power, manual dimming control of 12 or 24V d.c. single colour LED arrays up to 30W.



Made with FlippingBook Annual report