THE REV ® TOOLS ARE MADE WITH HARDENED STEEL FOR TOOLS WITH AN ADDITIONAL TERMICAL TREATMENT APPLIED. Additionally, an additional induction hardening is added on the surface rear the seat of the insert to reach an hardness of 58/60 HRC. This will make the tool resistant to compression and will guarantee long life. All tools are equipped with forced coolant supply holes, which, in addition to lubricating and cooling the insert, are important for chip evacuation on the slotting operations with blind holes. The REV ® tool is available in various lengths and shank sizes. • Standard-length tool available with Ø 25 mm or Ø 32 mm or Ø 1" or Ø 1-1/4" • Long tool available with Ø 25 mm or Ø 32 mm or Ø 1" or Ø 1-1/4"
• Standard-length tool available with Ø 16 mm or Ø 20 mm • Short-length tool available with Ø 16 mm or Ø 20 mm • Short-length tool available with Ø 25 mm.
None of the thousands of REV ® system users have reported breakage or abnormal wear problems attributable to CNC broaching. From internal tests conducted by REV ® , the cutting force required to machine, for example, a 20 mm wide keyway is comparable to the cutting force required to drill a common 14 mm diameter hole.
(mm)
UT Ø 16 mm - Ø 20 mm standard & corto standard & short type
L1
L2
L3 L4 D1
D2 D3
(mm)
(g)
UT-02-16 UT-02-16-S UT-03-16 UT-03-16-S UT-04-16 UT-04-16-S UT-05-16 UT-05-16-S UT-06-16 UT-06-16-S UT-02-20 UT-02-20-S UT-03-20 UT-03-20-S UT-04-20 UT-04-20-S UT-05-20 UT-05-20-S UT-06-20 UT-06-20-S UT-08-20 UT-08-20-S
25 74
9
40 16 6,5 24 40 16 6,5 24 40 16 7,8 24 40 16 7,8 24 40 16 10 24 40 16 10 24 40 16 12 24 40 16 12 24 40 16 16 24 40 16 16 24 50 20 6,5 24 50 20 6,5 24 50 20 7,8 24 50 20 7,8 24 50 20 10 24 50 20 10 24 50 20 12 24 50 20 12 24 50 20 16 24 50 20 16 24 50 16 20 24 50 20 20 24
PN-0 PN-0 PN-1 PN-1 PN-1 PN-1 PN-1 PN-1 PN-2 PN-2 PN-0 PN-0 PN-1 PN-1 PN-1 PN-1 PN-1 PN-1 PN-2 PN-2 PN-2 PN-2 PN-0 PN-0 PN-1 PN-1 PN-1 PN-1 PN-1 PN-1 PN-2 PN-2 PN-2 PN-2
T08 T08 T08 T08 T08 T08 T08 T08 T15 T15 T08 T08 T08 T08 T08 T08 T08 T08 T15 T15 T15 T15 T08 T08 T08 T08 T08 T08 T08 T08 T15 T15 T15 T15
VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-2 VN-2 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-2 VN-2 VN-2 VN-2 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-1 VN-2 VN-2 VN-2 VN-2
7,5 7,5 8,9 8,9
0,088 0,085
17,5 66,5 9
30 79
9
0,1
21
70 9
0,09 0,108
40 89 28 77 46 95
9 9 9
11 11
0,1
13 13
0,11
33 82 9 56 105 9
0,1
17,5 17,5
0,158 0,145 0,145
39 88 25 84
9 9
7,5 7,5 8,9 8,9
17,5 76,5 9
0,14 0,15
30 89
9
21
80 9
0,145 0,165 0,154 0,175 0,158 0,214 0,202
40 99 28 87
9 9
11 11
46 105 9 33 92 9 56 115 9
13 13
17,5 17,5
39 98 68 127 48 107
9 9 9
22 22
0,28
0,225
UT Ø 25 mm standard & corto standard & short type
(mm)
L1
L2
L3 L4 D1
D2 D3
(mm)
(g)
UT-02-25-GC UT-02-25-GC-L UT-03-25-GC UT-03-25-GC-L UT-04-25-GC UT-04-25-GC-L UT-05-25-GC UT-05-25-GC-L UT-06-25-GC UT-06-25-GC-L UT-08-25-GC UT-08-25-GC-L
25 89
9
55 25 6,5 30 55 25 6,5 30 55 25 7,8 30 55 25 7,8 30 55 25 10 30 55 25 10 30 55 25 12 30 55 25 12 30 55 25 16 30 55 25 16 30 55 25 20 30 55 25 20 30
7,5 7,5 8,9 8,9
0,344 0,396 0,299 0,334 0,316 0,345 0,399 0,305 0,348 0,35 0,443 0,488
34,5 98,5 9
30 94
9
40 104 9 40 104 9 56 120 9 46 110 9 66 130 9 56 120 9 68 132 9 100 164 9 81 145 9
11 11
13 13
17,5 17,5
22 22
15
www.revtool.eu
TOOLS AND INSERTS
GENERAL CATALOGUE 2026
Made with FlippingBook - Online Brochure Maker