MINITOOLS
TOOLS AND INSERTS
THE MINITOOL SERIES WAS DEVELOPED BASED ON THE NEED TO SATISFY DEMANDS LINKED TO MACHINING SMALL WORKPIECES. Integral inserts were used to satisfy these demands, as these types of inserts make it possible to achieve extremely small cutting profiles, with very different geometries. In order to ensure high tool rigidity and achieve tools that are very precise for the operation that needs to be performed, the integral inserts are always designed ad hoc based on specific customer demands. To ensure the best delivery, the REV ® production facility always has a stock of semi-finished MINITOOL inserts and has developed specific programmes for its CNC grinding machines, to produce the necessary inserts accordingly with the customer needs, in a very short time. MINITOOL series inserts can fit UT-1/8 insert-carrier (available in different diameters). The UT-1/8 adapter can be used with eccentric bushing, the same way as the other holders with round shank, therefore, can correct any alignment errors on CNC lathes that are not equipped with a Y axis. Alternatively, MINITOOL inserts can be locked into the machine tool-carrier with a simple clamping gripper (for ex. an ER gripper). In this case it is preferable for the machine to be equipped with a Y axis.
Keyway
Square profile
Hexagon profile
Double square profile
Special profile
Spline profile
UT-1/8
(mm)
UT-1/8 UT-1/8-19,05
L1 90 90 90
L2
D1 30 30 30 38
D2
15 15 15 15
19,05
UT-1/8-20 UT-1/8-25 UT-1/8-32
20 25 32
100
MINITOOL INTEGRAL INSERT
Integral inserts in the MINITOOL line feature a flat side on the collar, with a diameter of 15 mm, allowing the operator to check the correct position of the insert in very short of time, through the use of common comparators or gauges. They can be manufactured in two possible alloys: sintered steel or, alternatively, widia. The life of the inserts is very long and they can be re-sharpened many times before having to replace them. The type of sharpening and coating are assessed based on the material that needs to be machined.
(mm)
IN-1/8
L1
L2
F1
D1
D2
IN-1/8
18
2
10 H7
15
21
www.revtool.eu
TOOLS AND INSERTS
GENERAL CATALOGUE 2026
Made with FlippingBook - Online Brochure Maker