TREX SELECT ® COMPOSITE HORIZONTAL MESH RAILING Installation Instructions
HOW TO INSTALL HORIZONTAL MESH RAILING/ CONTINUED TREX SELECT ®
Measuring and Cutting Anti-Rattle Gaskets 11a. For 36" rail, measure, and cut side anti-rattle gaskets to 27". For 44" rail, side anti- rattle gaskets will not require cutting.
12c
11b
11b. F or top and bottom anti-rattle gaskets, using same measurement from top/bottom channels ( see step 9 ), add 1" and cut top and bottom anti-rattle gaskets to this measurement.
12c. C UTTING MESH WIDTH (REQUIRED FOR ANY SPAN) : For width, measure distance between posts and subtract 1", and cut mesh to length calculated.
Cutting Mesh
12a
Installing Mesh Caps
13
Retain bottom edge of mesh panel
12a. W HEN INSTALLING 36" AT FULL SPAN : For 36" rail, cut the top two rows of the mesh. DO NOT CUT BOTTOM OF MESH PANEL . NOTE: An angle grinder (with proper blade) is recommended for cutting wire mesh. (ALWAYS USE PROPER SAFETY GEAR WHEN CUTTING WITH ANGLE GRINDER.) Note that heavy duty bolt cutters can also be used.
13. P lace mesh caps on all cut ends of mesh for corrosion protection.
12b. W HEN INSTALLING 44" rail , mesh will not require cutting.
4
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SMHR-0726
Made with FlippingBook flipbook maker