HOW TO INSTALL HORIZONTAL MESH RAILING/ CONTINUED TREX SELECT ®
Installing Anti-Rattle Gaskets onto Mesh
Attaching Top Brackets on Top Rail
15
14a
15. C enter top brackets on each end of TOP RAIL. Attach bracket using three #8-18 x 1 1/14" self- drilling screws (C4) . NOTE: For ease of bracket attachment place rail against stationary flat vertical surface along with bracket.
Installing Top Channel to Top Rail
16 6' Section = Minimum 4 screws 8' Section = Minimum 5 screws
14a. .Install top and bottom gaskets onto top and bottom of mesh panel. Make sure gaskets are centered and fully seated onto mesh.
14b
16. Center top channel in between slots in bracket, also centering on rail (NOTE: there will be a slight gap on each end between brackets and channel), and install using #8-18 x 1 1/4" self-drilling screws (C4): Using a minimum four screws for 6' section and minimum five screws for 8' section.
14b. Install side anti-rattle gaskets. Ensure gaskets are full seated.
5
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SMHR-0726
Made with FlippingBook flipbook maker