TREX SELECT ® HORIZONTAL MESH RAILING Installation Instructions
HOW TO INSTALL HORIZONTAL MESH RAILING/ CONTINUED TREX SELECT ®
Installing Mesh Panel
Installing Top Rail onto Mesh Panel
18
17
18. .Place top rail assembly onto mesh rail, pressing d own top rail until brackets fully rest on side channels.
17. S lide mesh panel down into side channels/side anti- rattle gaskets and fully seat into bottom channel/ anti-rattle gaskets. IMPORTANT NOTES: » ENSURE THAT THE NON-CUT SIDE OF THE MESH PANEL IS PLACED IN THE BOTTOM CHANNEL. » IF NECESSARY USE SOAPY WATER ON THE VERTICAL ANTI-RATTLE GASKETS TO ALLOW MESH PANEL TO SLIDE DOWN MORE EASILY.
NOTE: Use a rubber mallet if required to fully seat top rail.
19
19. Secure top bracket to post using two wood #9-16 x 1 3/4" screws (provided) . IMPORTANT NOTE: SET DRILL TO LOW SPEED AND LOW CLUTCH SETTING WHEN INSTALLING THESE SCREWS. DO NOT USE IMPACT DRIVER. Attaching Post Caps 20. Secure post caps with silicone or PVC adhesive (apply
20
adhesive on the inside self-centering/ corner tabs).
NOTE: Clean up any excess adhesive before it dries .
6
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SMHR-0825
Made with FlippingBook flipbook maker