GWO Basic Technical Training V6.0
2021-04-01_TS_BTT_V06
2. BTT ELECTRICAL MODULE
The following equipment is required during the entire duration of this BTT Electrical Training to meet the needs of the BTT Electrical Module.
• PPE suitable for electrical work (Insulating gloves (at least one pair per two participants), googles, safety shoes or boots and suitable clothing) • LOTO equipment
Measuring devices:
• Multimeter (at least 1 per two participants) • Two Pole voltage detector (at least 1 per 6 participants)
There must be a panel with standard DIN rail for mounting an electrical circuit (1 per two participants) and the following components:
• Power supply or transformer and a bridge rectifier • Electrical protection • Appropriate electrical wires • Different value resistances • Lamps • Switches • Capacitors • Diodes • Terminals for rail • Push buttons (NO and NC) • Contactors • Relays • Emergency stop button • PT 100 sensor
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
Global Wind Organisation www.globalwindsafety.org
152 / 158
Made with FlippingBook - professional solution for displaying marketing and sales documents online