GWO Basic Technical Training V6.0
2021-04-01_TS_BTT_V06
3. BTT HYDRAULIC MODULE
The following equipment is required during the entire duration of this BTT Hydraulics Training to meet the need of the BTT Hydraulics Module:
• PPE suitable for hydraulic work (Gloves, safety goggles, safety shoes or boots and suitable clothing or overalls) • LOTO equipment • Filling kit for nitrogen • Nitrogen bottle • Pressure gauge/manometer
There must be a rig with pre-built electrical control of a hydraulic circuit that contains the following components:
Tank with level indicator
•
Pump with electrical motor
•
Directional valve
•
Needle valve
•
Pressure relief valve Non-return valve Pressure switch
•
•
•
Actuator
•
Accumulator
•
Test points
•
Oil
•
Filters
•
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
Global Wind Organisation www.globalwindsafety.org
153 / 158
Made with FlippingBook - professional solution for displaying marketing and sales documents online