Amphenol Socapex │ POWERSAFE
POWERSAFE / VG96944 - BACKSHELLS
TV NSA Backhells
These backshells ensure the shielding by clamping the braid with a screwing system. The free inner ring avoids twisting of the braid during screwing (double conus style). See part how to order page 23
Shell size
A Thread Metric
B max
Ø C max
Ø D max
Ø E max
Ø G max
13
M18 x 1.0-6H 26
12.7
28.1 21.2 22.6
15
M22 x 1.0-6H 29
14.8
31.1 25.1 25.8
17
M25 x 1.0-6H 32
17.9
34.1 28.1 29.0
21
M31 x 1.0-6H 39
23.1
41.1 34.1 35.2
23
M34 x 1.0-6H 42
26.2
44.1 36.9 38.4
25
M37 x 1.0-6H 45
28.8
49.1 39.9 41.5
Use Straight Shrink Boots 202K121-12 (size 13), 202K132-12 (size 15 and 17), 202K153-12 (size 21, 23 and 25) and S1255 Adhe - sive TV NSA Installation instructions
Figure 1
Figure 2
2
Figure 3
Figure 4
Figure 5
VG95319 Backshells These backshells are suitable for Power Safe connectors and ensure the shielding by clamping the braid with a screwing system (single conus style). 4. Install the braid as shown on figures 3 and 4: Release the braid and cover the backshell (a) and the connector’s shell. Slide the first ring (b) over the braid. Fold back the braid on the ring (b) and slide the second ring (c) over the braid and the first ring (b). Screw the last ring (d) at the rear of the backshell. If necessary, fix the extra braid on the outer jacket of the cable. If this installation (double folding of the braid) is not possible, refer to figure 5: Slide the first ring (b). Release the braid and cover the backshell (a) and the connector’s shell. Cut the braid as shown. Slide the second ring (c) over the braid and the first ring (b). Screw the last ring at the rear of the backshell. 5. Then, Install the heat-shrink moulded piece. 1. Prepare the cable for termination process and slide the items onto the cable in the order shown on figure 1. 2. Screw the backshell at the rear of the connector. The best performance in time of the system « connector + rear accessory » consists in applying the torque value to screw then unscrew, to apply the torque value & screw a second time, then to unscrew and finally screw the torque value a third time. 3. Fold back the braid on the outer jacket and fix it (figure 2)
Backshell VG Standard
Micro Clamping Band
Standard Clamping Band
Tool for Micro Band
Tool for Standard Band
Shrink boot
Adhesive
or
Shell size
13 15 17 21 23 25
VG95319-1011G012A
VG95343T06B001A
VG95319-1011G004A
895693
VG95343T06B003A
VG95319-1011G005A
VG95343T15A001
072952
809985
809952
VG95319-1011G008A
VG95343T06B004A
VG95319-1011G009A
VG95343T06B005A
895700
VG95319-1011G010A VG95343T06C010A Use Straight Shrink Boots 202K121-12 (size 13), 202K132-12 (size 15 and 17), 202K153-12 (size 21, 23 and 25) and S1255 Adhesive
All dimensions are given for information only and are in mm, except as otherwise specified │ *in mm: 1mm=0.03937 inch
Due to technical modifications, all information provided is subject to change without prior notice Designed by Amphenol Socapex
14
Made with FlippingBook - professional solution for displaying marketing and sales documents online