Part Number Code
-
D A 80
A 01
Thermal Clamp Series :
SIHD G
Side of equipment : Left : G Right : D Version : A : screw fixing C : front (latch fixing) and rear (screw fixing) - Cam w ith flat surface E : Allen cam (AMX-APX) ground forces, standard 80 mm long Length : In mm, every 20 mm - 0.79 in incremental min. 80 mm ( 3.15 in ) to a max. 240 mm ( 9.45 in ) for version A, C and F
min. 89 mm ( 3.50 in ) for version T min. 169 mm ( 6.65 in ) for version R Thickness of PCB drain : A : 1.6 mm ( 0.063 in ) preferred B : 1.2 mm ( 0.047 in ) C : 0.8 mm ( 0.031 in ) except R version Finish : 01 : conductive chemical Ni plating 02 : black anodised Deviation : Blank for normal FXXX (to customer specifications)
† Additional and specific designs available : please consult Amphenol.
Technical Assistance Our engineering team has extensive experience in the packaging of thermal clamps. Modification of standard thermal clamps for special application is possible. If more information is needed concerning the products in this publication, or if you have any special application needs, please contact your nearest Amphenol Sales Office or Amphenol Corporation at the following address: AMPHENOL CORPORATION Amphenol Socapex 948 Promenade de l'Arve BP 29 74311 THYEZ - FRANCE Telephone : + 33 450 892 800 Fax : + 33 450 962 975 www.amphenol- socapex .com
We welcome the opportunity of providing you with the assistance needed to solve your thermal management problems.
AMPHENOL SOCAPEX 948, Promenade de l'Arve BP 29 74311 THYEZ CEDEX FRANCE
Amphenol ®
1
© 2002Copyright. Printed in France Amphenol Socapex -Ref. SIHD-GT2002-04DS(draft)
Made with FlippingBook flipbook maker