SiteSync IQ ® Wired Clock/System Controller
1
These system contollers are for wired systems only and do not have a transmitter for wireless clocks. Ethernet provides remote programming capability for signal circuits. SYSTEM CONTROLLER SPECIFICATIONS Display: 128 × 64 LCD Dimensions: 5"h × 16⅞"w × 8"d Peak Input Power: 10 watts Nominal Power: 2.5 watts Fuse: (Input Power) 8 amps, 250VAC, Subminiature Standby Timekeeping: 10 years Timekeeping Accuracy: ±1 minute/year
SIGNAL CIRCUIT SPECIFICATIONS Signal Circuits (6): Dry contacts rated at 250VAC, Continuous: 7.5 amps resistive, 5 amps inductive, 50% duty cycle * : 10 amps resistive Program Retention: Unlimited Programmable Events: 9,999 events total Schedules: 99 maximum Signal Duration: Programmable 1-9 seconds or continuous on *50% duty cycle is defined as all signal relays on for one minute, off for one minute, repeating
CLOCK CIRCUIT SPECIFICATIONS Clock Circuit Fuses: 8 amps, 250VAC, subminiature RACK MOUNT EARS (optional, below)
Construction: 18-gauge steel Finish: Powder coated black
Model No.
Description
Each
With Ethernet SSQMSTR-00X8E-J24
1 clock circuit/6 signal circuits
$2035.95
H004100-J24 $23.95 N ote: Rack mount kit includes: 2 brackets, 8 screws and Installation Instruction sheet. If running a 2- or 3-wire 24VDC impulse system, a power supply must be purchased along with the SiteSync IQ wired clock/signal programmer to successfully run the system. See page 41. Rack mount kit
H004100
▪ 38
REPLACEMENT CLOCKS ARE MANUFACTURED IN DASSEL, MN
Made with FlippingBook Online newsletter