Automation Catalog

Installation clamping module  Hydraulic opening.  Pneumatic blow-out.  Opening operating pressure: min. 50 bar - max. 60 bar. ZERO-POINTS

Pull-in/locking force up to [kN]

Holding force [kN]

Weight [Kg]

Model No.

Blow out

Size

● ● ●

570253 KH10 570254 KH20 570255 KH40

10 20 40

25 55

0.45 1.40 3.40

105

 Cover and piston hardened.  Repeatability < 0.005 mm.

Application: Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining. Note: The installation clamping module has high holding, pull-in and locking forces. This is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free). The clamping module with blow-out and support control has two connections: 1x hydr. opening (1) / 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)

Dimensions: Model No. Size

dia.D [mm]

dia.DN [mm]

dia.D1 [mm]

H [mm]

HA [mm]

dia.LK [mm]

T [mm]

M

570253 KH10 78

22

50 30 7 60 M523

570254 KH20 112 32 78 44 10 88 M6 34 570255 KH40 148 40 102 57 15 118 M8 42

 Pneumatic opening.  Pneumatic blow-out.  Opening operating pressure: min. 8 bar - max. 12 bar.  Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar. Installation clamping module

Model No.

Pull-in/locking force up to [kN]

Holding force [kN]

Weight [Kg]

Size

Blow out

● ●

570256 KP10 570257 KP20

8

25 55

0.45 1.40

17

Application: Zero-point clamping system for set-up-time-optimised clamping during cutting and non- cutting machining. Note: The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and locked mechanically through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free). The clamping module with blow-out and support control has three connections: 1x pneum. Opening (1) / 1x pneum. Retensioning (turbo) (2), 1x pneum. Blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.) Dimensions: Model No. Size dia.D [mm] dia. DN [mm] dia. D1 [mm] H [mm] HA [mm] dia. LK [mm] M T [mm]

 Cover and piston hardened.  Repeatability < 0.005 mm.

570256 KP10 78

22

50 30 7

60 M5 23

570257 KP20 112 32

78 44 10 88 M6 34

35

Made with FlippingBook - Online Brochure Maker