Brand Guidelines & Conditions of Use
Uncontrolled when printed. Ensure document is current prior to use. Printed on 01/04/2021
of 25 pixels between each side of the certification mark and other graphic or textual elements on the web page. 28 Where the WRAS Approved Product Certification Mark is used it must be replicated without adaptation or alteration, (including without limitation any resizing, stretching or cropping). 29 The full colour version of the Certification Mark should be used wherever possible. However, in cases of technical or budgetary constraints, black and white versions may be used (these versions may be requested). 30 If a Certification Mark is used on a coloured background, the text is to be reversed to white. 31 The clear zone around the Certification Marks must always be preserved to protect the logo’s integrity. 32 Where there are any legal and/or regulatory requirements about the WRAS Approved Product Certification Mark, you must present the WRAS Approved Product Certification Mark in a way, which meets those requirements. 33 It is a condition of use that any mark shall not be used in any printed advertisement or printed publicity matter without indicating that it is a certification mark.
SHOWERING Shower Heads
LOGO & CERTIFICATION MARK STRUCTURE
The logos must be arranged as shown below. None of the information is to be rearranged in any way.
8 The logo must not be used by Approval Holders
SHOWER HEADS - CHROME
The Certification mark is the appropriate logo with the additional text “CERTIFICATION MARK” as shown in the image below.
9 Only the appropriate Certification Mark is to be used by Approval Holders in this format
Brand Guidelines & Conditions of Use
Uncontrolled when printed. Ensure document is current prior to use. Printed on 01/04/2021
WRAS-Cust-403 The full colour version of the Certification Mark should be used wherever possible. However, in cases of technical or budgetary constraints, black and white versions may be used (these versions may be requested). 30 If a Certification Mark is used on a coloured background, the text is to be reversed to white. 31 The clear zone around the Certification Marks must always be preserved to protect the logo’s integrity. 32 Version 3.0 Issued on: 30/07/2021 Page 7 of 10 of 25 pixels between each side of the certification mark and other graphic or textual elements on the web page. 28 Where the WRAS Approved Product Certification Mark is used it must be replicated without adaptation or alteration, (including without limitation any resizing, stretching or cropping). 29 Where there are any legal and/or regulatory requirements about the WRAS Approved Product Certification Mark, you must present the WRAS Approved Product Certification Mark in a way, which meets those requirements. 33 It is a condition of use that any mark shall not be used in any printed advertisement or printed publicity matter without indicating that it is a certification mark.
LOGO & CERTIFICATION MARK STRUCTURE
MP
The logos must be arranged as shown below. None of the information is to be rearranged in any way.
ø200mm
78.0001
8 The logo must not be used by Approval Holders
The Certification mark is the appropriate logo with the additional text “CERTIFICATION MARK” as shown in the image below.
9 Only the appropriate Certification Mark is to be used by Approval Holders in this format
WRAS-Cust-403
Version 3.0
Issued on: 30/07/2021
Page 7 of 10
200 x 200mm
MP
78.0003
200 x 200mm
MP
60.1028
ø200mm
60.1008
FEATURES • S tainless steel one piece construction • P olished (chrome effect) finish • Rainfall outlet • 4mm thickness Pressure
Shower Head Chrome Finish Description 8” Round shower head - WRAS Approved - 8” Square shower head - WRAS Approved - 8” Round Fixed Over Head Shower Head 8” Square Fixed Over Head Shower Head
Brand Guidelines & Conditions of Use
Uncontrolled when printed. Ensure document is current prior to use. Printed on 01/04/2021
Code £ Ex VAT £ Inc VAT
of 25 pixels between each side of the certification mark and other graphic or textual elements on the web page. 28 Where the WRAS Approved Product Certification Mark is used it must be replicated without adaptation or alteration, (including without limitation any resizing, stretching or cropping). 29 The full colour version of the Certification Mark should be used wherever possible. However, in cases of technical or budgetary constraints, black and white versions may be used (these versions may be requested). 30 If a Certification Mark is used on a coloured background, the text is to be reversed to white. 31 The clear zone around the Certification Marks must always be preserved to protect the logo’s integrity. 32 Where there are any legal and/or regulatory requirements about the WRAS Approved Product Certification Mark, you must present the WRAS Approved Product Certification Mark in a way, which meets those requirements. 33 It is a condition of use that any mark shall not be used in any printed advertisement or printed publicity matter without indicating that it is a certification mark.
78.0001 83.00 78.0003 91.00 60.1008 24.00 60.1028 24.00
99.60
109.20
MP (0.5 bar minimum)
28.80 28.80
LOGO & CERTIFICATION MARK STRUCTURE
The logos must be arranged as shown below. None of the information is to be rearranged in any way.
8 The logo must not be used by Approval Holders
SHOWER HEADS - CHROME
Brand Guidelines & Conditions of Use
Uncontrolled when printed. Ensure document is current prior to use. Printed on 01/04/2021
The Certification mark is the appropriate logo with the additional text “CERTIFICATION MARK” as shown in the image below. of 25 pixels between each side of the certification mark and other graphic or textual elements on the web page. 28 Where the WRAS Approved Product Certification Mark is used it must be replicated without adaptation or alteration, (including without limitation any resizing, stretching or cropping). 29 The full colour version of the Certification Mark should be used wherever possible. However, in cases of technical or budgetary constraints, black and white versions may be used (these versions may be requested). 30 If a Certification Mark is used on a coloured background, the text is to be reversed to white. 31 The clear zone around the Certification Marks must always be preserved to protect the logo’s integrity. 32 9 Only the appropriate Certification Mark is to be used by Approval Holders in this format Where there are any legal and/or regulatory requirements about the WRAS Approved Product Certification Mark, you must present the WRAS Approved Product Certification Mark in a way, which meets those requirements. 33 It is a condition of use that any mark shall not be used in any printed advertisement or printed publicity matter without indicating that it is a certification mark.
ø300mm
WRAS-Cust-403
Version 3.0
Issued on: 30/07/2021
Page 7 of 10
LOGO & CERTIFICATION MARK STRUCTURE
The logos must be arranged as shown below. None of the information is to be rearranged in any way.
MP
8 The logo must not be used by Approval Holders
78.0002
The Certification mark is the appropriate logo with the additional text “CERTIFICATION MARK” as shown in the image below.
9 Only the appropriate Certification Mark is to be used by Approval Holders in this format
300 x 300mm
WRAS-Cust-403
Version 3.0
Issued on: 30/07/2021
Page 7 of 10
MP
Shower Heads Chrome Finish Description 12” Round shower head - WRAS Approved - 12” Square shower head - WRAS Approved -
78.0004
Code £ Ex VAT £ Inc VAT
78.0002 184.00 78.0004 204.00 78.0005 159.00
220.80 244.80 190.80
300 x 200mm
8” x 12” Rectangle shower head
FEATURES • S tainless steel one piece construction • P olished (chrome effect) finish • Rainfall outlet • 4mm thickness Pressure
MP
78.0005
MP
MP (0.5 bar minimum)
- 0.5 bar minimum
974
Made with FlippingBook Digital Publishing Software