What makes our DTF different to other systems:
Our machines are not just modified Epsons. Yes, they use Epson parts like the printer carriage, but the electronics and software are custom-made for DTF.
The heads used in all our DTF machines are purchased NEW from Epson Japan. Many competing systems have rejected or reconditioned heads which don’t last long.
The A4 unit is a great introduction to DTF and prints at around 0.5m2 per hour so it’s perfect for someone who wants to test the waters of DTF without spending a lot of money.
The A3 unit uses dual Industrial Epson I1600 print heads. These are the same heads used in large-format production machines like Eco-Solvent, UV printing and so on. Most A3 dual-head machines use the XP600 head which while better than an office-grade print head is not the best solution as it can trap air which reduces the lifespan of the print head. The I1600 print head lasts 3 to 4 times longer than an XP600 print head and is far less likely to block. The A2 unit uses dual Industrial Epson I3200 print heads and has advanced functions like auto-cleaning, intelligent ink level monitoring, white ink circulating system and a vacuum system. The I1600 and I3200 print heads only differ in the amount of nozzles on the head. Why A2 and not A1 ? A t- shirt’s maximum width is A2. If you buy an A1 printer you waste time cutting the film to fit a shirt and waste money for no benefit.
.
Page | 17
Made with FlippingBook - professional solution for displaying marketing and sales documents online