Appl. Sci. 2025 , 15 , 9160
13of 14
Research Facilities and Equipment Center) grant funded by the Ministry of Education (Grant No. RS-2022-NF000850). Institutional Review Board Statement: Not applicable. Informed Consent Statement: Not applicable. Data Availability Statement: The original contributions presented in the study are included in the
article, further inquiries can be directed to the corresponding author. Conflicts of Interest: The authors declare no conflicts of interest.
References 1. Motamedian, H.R.; Halilovic, A.E.; Kulachenko, A. Mechanisms of strength and stiffness improvement of paper after PFI refining with a focus on the effect of fines. Cellulose 2019 , 26 , 4099–4124. [CrossRef] 2. Hubbe, M.A. Paper’s strength: A review. BioResources 2007 , 2 , 739–788. 3. Mandlez, D.; Koller, S.; Eckhart, R.; Kulachenko, A.; Bauer, W.; Hirn, U. Quantifying the contribution of fines production during refining to the resulting paper strength. Cellulose 2022 , 29 , 8811–8826. [CrossRef] 4. Seth, R.S. The measurement and significance of fines. Pulp Pap. Can. 2003 , 104 , 41–44. 5. Smook, G.A. Handbook for Pulp & Paper Technologists , 4th ed.; TAPPI Press: Atlanta, GA, USA, 2016. 6. Gharehkhani, S.; Sadeghinezhad, E.; Kazi, S.N.; Yarmand, H.; Badarudin, A.; Safaei, M.R.; Zubir, M.N.M. Basic Effects of Pulp Refining on Fiber Properties—A Review. Carbohydr. Polym. 2015 , 115 , 785–803. [CrossRef] [PubMed] 7. Liu, H.; Dong, J.; Qi, K.; Guo, X.; Yan, Y.; Qiao, L.; Zhao, Z. Effect of Pulp Properties on the Power Consumption in Low Consistency Refining. J. Korean Wood Sci. Technol. 2020 , 48 , 869–877. [CrossRef] 8. Banavath, H.N.; Bhardwaj, N.K.; Ray, A.K. A comparative study of the effect of refining on charge of various pulps. Bioresour. Technol. 2011 , 102 , 4544–4551. [CrossRef] [PubMed] 9. Thompson, D.; Patel, R.; Kim, J. Optimization of Mixed Pulp Stocks for Paper Strength and Smoothness. J. Pulp Pap. Sci. 2018 , 44 , 233–241. 10. Min, D.; Gu, Y.; Li, J. Lightweight Refiner Plate for Hardwood Kraft Pulp Fibers. Nord. Pulp Pap. Res. 2020 , 35 , 123–130. 11. Min, B.G.; Lee, J.Y.; Kim, C.H.; Park, S.H.; Lee, M.S.; Gu, H.G.; Lee, C.Y. New technology for developing a lightweight refiner plate for hardwood kraft pulp fibers. BioResources 2020 , 15 , 9128–9142. [CrossRef] 12. Gu, Y.; Min, D.; Li, J. Development of a lightweight vertical bar plate for softwood kraft pulp refining. BioResources 2021 , 16 , 5528–5542. 13. Zhang, L.; Wang, Q.; Chen, S.; Li, H. Effects of Beating and Refining on Fiber Characteristics and Paper Properties of Hardwood- Softwood Blended Pulps. Materials 2021 , 14 , 5678. 14. Thompson, D.; Green, P.; Miller, T. Optimization of Mixed Pulp Stocks for Enhanced Paper Properties. Nord. Pulp Pap. Res. 2018 , 33 , 567–575. 15. Lehtinen, E. Papermaking Part 1, Stock Preparation and Wet end. In Papermaking Science and Technology ; Tappi and PPI: Atlanta, GA, USA, 2000; pp. 81–122. 16. ISO 5264-1:2016 ; Pulps—Laboratory Beating—Part 1: Valley Beater Method. ISO: Geneva, Switzerland, 2016. 17. Lee, J.Y.; Kim, C.H.; Park, H.H.; Kwon, S.; Yim, H.H.; Gu, H.G.; Min, B.G. Study of Mixed Refining Behaviors of Softwood Kraft Pulps and Hardwood Kraft Pulps Using Different Bar Fillings. J. Korea TAPPI 2018 , 50 , 31–38. [CrossRef] 18. Gu, H.G.; Min, B.G.; Lee, J.Y.; Park, S.H. Mechanical modification of softwood pulp fibers using a novel lightweight vertical bar plate. J. Korea TAPPI 2021 , 20 , 241–251. [CrossRef] 19. Ryu, J.H.; Kim, C.H.; Lee, J.Y.; Lee, C.Y.; Park, J.H. Study of Refining Effect of Mixed Pulps Using Refiner Plates with Different Bar Pattern. Appl. Sci. 2022 , 12 , 11445. [CrossRef] 20. ISO 5267-1:1999 ; Pulps—Determination of Drainability—Part 1: Schopper-Riegler Method. ISO: Geneva, Switzerland, 1999. 21. ISO 5269-1:2005 ; Pulps—Preparation of Laboratory Sheets for Physical Testing—Part 1: Conventional Sheet-Former Method. ISO: Geneva, Switzerland, 2005. 22. ISO 5270:2022 ; Pulps—Laboratory Sheets—Determination of Physical Properties. ISO: Geneva, Switzerland, 2022. 23. Kerekes, R.J.; Senger, J.J. Characterizing the action of refiner bars. Pulp Pap. Can. 2006 , 107 , 41–45. 24. Kerekes, R.J. Characterizing refining action in PFI mills. Appita J. 2005 , 58 , 114–121. 25. Kerekes, R.J.; Meltzer, F. The influence of bar width on bar forces and fiber shortening in low-consistency pulp refining. Nord. Pulp Pap. Res. J. 2018 , 33 , 220–225. [CrossRef] 26. Mohlin, U.B.; Miller, J.A. Effects of refining on pulp fiber structure. In Handbook of Physical Testing of Paper , 1st ed.; Marcel Dekker: New York, NY, USA, 1995; pp. 193–230. 27. Brecht, W.; Siewert, W. The mechanism of the beating process. Tappi J. 1966 , 49 , 50–57.
Made with FlippingBook interactive PDF creator