Deep cleaning and maintenance
Shower toilets: Cleaning the shower bar
Please refer to page 8 for information on how to regularly clean the outside of the hansgrohe LavaPura shower toilet. The shower bar is made of high-quality, antibacterial-coated and easy-to-clean stainless steel. It is automatically disinfected after each use using UV light. If you want to clean and descale it thoroughly, do the following.
Do NOT pull out or push in the spray wand when wiping! Otherwise you could damage the wand or the motor.
Cleaning the shower bar
1. Extend nozzle Briefly press the „Cleaning nozzle“ button on the remote control to activate the manual nozzle wash function. The nozzle is automatically extended.
2. Remove the jet nozzle Wipe the nozzle with a soft cloth or a soft brush. For gentle treatment, please use neutral soap.
3. Clean the jet nozzle Please refer to the installation manual for your hansgrohe shower toilet for step-by-step instructions on how to clean, descale and reinstall the jet nozzle.
4. Retract nozzle After ten minutes – or by briefly pressing the „Stop“ button – the spray wand is automatically retracted again.
20
Made with FlippingBook interactive PDF creator