RE 65 ∅ 65 mm, graphite brushes, 250 watt
M 1:4
Stock program Standard program Special program (on request)
Part Numbers
353294 353295 353296 353297 353298 353299 353300 353301 388984 388985 388986 388987 388988 388989 388990 388991
Industrial Version IP54*
Motor Data
Values at nominal voltage 1 Nominal voltage 2 No load speed 3 No load current 4 Nominal speed 5 Nominal torque 7 Stall torque 8 Stall current 9 Max. efficiency Characteristics 10 Terminal resistance 11 Terminal inductance 12 Torque constant 13 Speed constant 14 Speed / torque gradient 15 Mechanical time constant
18 24 36 48 60 70 70 70 3520 4090 3970 3670 3680 3440 3190 2690 755 697 437 289 231 179 160 125 3250 3810 3700 3420 3450 3220 2960 2470 427 501 751 800 813 832 839 888 10 10 9.32 6.8 5.53 4.51 4.21 3.74 13600 15700 17400 16100 16200 15100 13700 12200 295 292 207 131 106 78.6 66.1 49.7 81 83 87 88 89 89 89 89 0.0609 0.0821 0.174 0.365 0.568 0.891 1.06 1.41 0.023 0.031 0.076 0.161 0.251 0.393 0.458 0.644 46 53.7 84.4 123 153 192 207 245 208 178 113 77.8 62.3 49.8 46.1 38.9 0.275 0.272 0.234 0.231 0.231 0.231 0.236 0.223 3.98 3.68 3.38 3.25 3.19 3.16 3.16 3.13 1380 1290 1380 1340 1320 1310 1280 1340
V
rpm mA rpm mNm mNm A
6 Nominal current (max. continuous current)
A %
Ω
mH
mNm/A rpm/V rpm/mNm
ms gcm 2
16 Rotor inertia
Specifications
Operating Range
Comments
Thermal data 17 Thermal resistance housing-ambient 18 Thermal resistance winding-housing
n [rpm]
Continuous operation In observation of above listed thermal resistance (lines 17 and 18) the maximum permissible winding temperature will be reached during continuous operation at 25°C ambient. = Thermal limit. Short term operation The motor may be briefly overloaded (recurring). Assigned power rating
1.3 K/W 1.85 K/W 123 s 1060 s
250 W
6000 1500 3000 4500
19 Thermal time constant winding 20 Thermal time constant motor 21 Ambient temperature 22 Max. winding temperature Mechanical data (preloaded ball bearings) 23 Max. speed 24 Axial play at axial load 25 Radial play
353297
-30…+100°C +125°C
< 25 N 0 mm > 25 N 0.1 mm 5500 rpm
1.5 3.0 4.5 6.0 150 300 450 600 750
M [mNm] I [A]
70 N 420 N 12 000 N 350 N preloaded
26 Max. axial load (dynamic) 27 Max. force for press fits (static) (static, shaft supported) 28 Max. radial load, 15 mm from flange Other specifications 29 Number of pole pairs 30 Number of commutator segments 31 Weight of motor
Modular System
Details on catalog page 46
Gear 460_GP 81 A
Motor Control 551_ESCON Module 50/5 552_ESCON Module 50/8 HE 563_EPOS4 Module 50/8 563_EPOS4 Module 50/15 565_EPOS4 Compact 50/8 CAN 566_EPOS4 Compact 50/15 567_EPOS4 70/15 568_EPOS4 Disk 60/8 569_EPOS4 Disk 60/12 553_ESCON 50/5 553_ESCON 70/10
Sensor 536_Encoder HEDS 5540 538_Encoder HEDL 5540
2
26
2100 g
Values listed in the table are nominal. Explanation of the figures on page 92. * Industrial version with radial shaft seal ring (resulting in increased no load current). IP54 protection only if mounted on brush side, in compliance with maxon modular system.
Industrial Version IP54* 541_Encoder HEDL 9140 590_Brake AB 44 592_End cap
maxon DC motor 163
© 2024 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software