ADVANTAGES
41
Wired communication
ABBfree@ home- Touch
System Access Point
Power supply
Sensor
Sensor/actuator unit
Actuator
230 V
PS
24 V
PS
230 V cable
Two-wire bus cable
Sensor/actuator unit
Sensor
Window contact
Valve drive with battery
Tablet
Smartphone
Wireless communication
Central distribution board with rail-mounting actuator The installation of central rail-mounting actuators in the consumer unit makes the installation of the sensors even easier – as only the bus line is located in the flush- mounted box. With this method, the costs for each channel can be reduced.
Sensor/actuator unit for decentralised control All in one. With the sensor/actuator unit, both the sensor and actuator are located in a single device to save space. The basic function of the unit is pre-configured, which makes programming the basic function unnecessary – but possible if required. The 230-volt line is wired as usual.
Sensor/actuator unit The sensor/actuator unit combines a control element and, for ex- ample, a switch actuator in the single flush-mounted housing. It is installed in the same way as a flush-mounted switch. The device has already been pre-programmed: this means the light can be switched on directly after installation – without any programming. The sensor/actuator unit can, of course, be freely re-configured via the user interface, just like all other sensors and actuators.
Made with FlippingBook - Online magazine maker