16
Booth Operation Testing
f1. _____ Set system to “Summer” mode f2. _____ Setup recipe D to the following settings:
f2a. Spray Temp Set: 75 f2b. Flash Temp Set: 85 f2c. Flash Seconds: 180 f2d. Cure 1 Temp Set: 140 f2e. Cure 1 Minutes: 5 f2f. Cure 2 Temp Set: 160
f2g. Cure 2 Minutes: 5 f2h. Cool Temp Set: 80 f2i. Cool Seconds: 180 f3. _____ Ensure all booth doors are closed then press “Start” button on remote panel and confirm the following: f3a. _____ All fans begin running and booth doors remain closed. If booth doors pop open, latches should be checked to ensure they have been tightened. If latches are tight and doors continue to pop open, see section d of this guide. f3b. _____ After fans are running, booth pressure settles in about -0.003” w.c. f3c. _____ Burner does not ignite f3d. _____ Allow system to run for 11 continuous minutes to ensure no faults occur f4. _____ Press “Stop” button on remote control panel and confirm the following: f4a. _____ All fans turn off and booth doors remain closed
If booth doors pop open, latches should be checked to ensure they have been tightened If latches are tight, VFD parameters will need to be adjusted to allow exhaust fan(s) to ramp down slower than supply fan.
f5. _____ Set system to “Winter” mode and press “Start” button f6. _____ After booth balances and burner ignites, allow to run for 5 continuous minutes f7. _____ Set system to run Recipe D, then press “Cure” button. The following should occur: f7a. Countdown timer should begin running, booth lights should turn off, and temp set point should be 85 f7b. Burner should be on, and discharge temp should be around 85 f7c. After 180 seconds, temp set point should change to 140, and booth fans should slow down f7d. Discharge temp should rise to around 140 f7e. After 5 minutes, temp set point should change to 160 f7f. Discharge temp should rise to around 160 f7g. After 5 minutes, temp set point should change to 80 f7h. Discharge temp should drop to around 80 f7i. After 180 seconds, burner and fans should shutdown f8. _____ Setup recipe C to the following settings:
f8a. Spray Temp Set: 75 f8b. Flash Temp Set: 85 f8c. Flash Seconds: 180 f8d. Cure 1 Temp Set: 170 f8e. Cure 1 Minutes: 5 f8f. Cure 2 Temp Set: 170 f8g. Cure 2 Minutes: 1 f8h. Cool Temp Set: 80
16
Made with FlippingBook - professional solution for displaying marketing and sales documents online