7 MPa Planning
Fixture Documentation Worksheet
VektorFlo ® Hydraulic Fixture Setup Documentation and Troubleshooting Worksheet
A-6
Fixture Designed By: ___________________________________ Fixture Built By: _____________________________________ Built For: _________________________________________ Fixture Serial # _____________________________________
1. All pressure gauges reading checked and verified at "0" operating pressure. No 2. Main system operating pressure read from the gauge mounted on the clamping system pump ______ MPa (bar) or inlet air pressure from air gauge on boosters ______ MPa (bar), booster ratio ______:______. 3. Pump restart pressure checked. Pump restarts at ______ MPa (bar). 4. Fixture operating pressure read at fixture gauge ______ MPa (bar), side A and ______MPa (bar), side B 5. Pressure limit circuits pressure checked: Yes Side A ______ MPa (bar) Components & location: ______________________________________ Side A ______ MPa (bar) Components & location: ______________________________________ Side A ______ MPa (bar) Components & location: ______________________________________ Side B ______ MPa (bar) Components & location: ______________________________________ Side B ______ MPa (bar) Components & location: ______________________________________ Side B ______ MPa (bar) Components & location: ______________________________________ 6. Sequence operations set to: Side A ______ MPa (bar) Components & location: ______________________________________ Side A ______ MPa (bar) Components & location: ______________________________________ Side A ______ MPa (bar) Components & location: ______________________________________ Side B ______ MPa (bar) Components & location: ______________________________________ Side B ______ MPa (bar) Components & location: ______________________________________ Side B ______ MPa (bar) Components & location: ______________________________________ 7. Fittings checked, secure, no leaks, proper type, not restrictive. Yes No 8. Schematic diagram attached. Yes No 9. Bill of materials (hydraulic components) attached. Yes No For troubleshooting assistance contact your Designer/Builder or, complete steps 1-9 above and fax this sheet with all additional pages to +1-816-364-0471. We are pleased to be of service.
© 1996- 2018 Vektek LLC. This documentation sheet may be used to document fixtures built using VektorFlo ® brand hydraulic clamps. This sheet is copyrighted material and remains the sole property of Vektek LLC. The use of this documentation sheet in its original form or altered state to document fixtures with non-Vektek product is a violation of your assigned rights .
© Vektek February 2021
1-800-992-0236
www.vektek.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online