Palletized Fixture Accessories
Decouplers
A3
PLUG "B" PORT FOR S/A SYSTEMS
B4 A4
A2 A5
B2 B5 B3
57.5 117.3
28.3
4.8
B1 A1 C1
B4
A4
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
G1/4 PORT ADAPTER. USE IN END PORT IF REQUIRED. (SHIPPED LOOSE)
28.6
G1/4 MANIFOLD MOUNT
SAE 6 PORT PLUG INSTALLED.
Model No.
L5-6005-43
Pressure Range
3 - 10 MPa
57.5
Accumulator Capacity Optional In-Line Filter Cartridge
62 cm³
G1/4 MANIFOLD MOUNT
DRILLED FOR M6 SHCS (4X)
31.5
L7-0048-81
54
L7-0842-05 (Bottom A5 & B5) or L7-0842-06 (Rear A4 & B4)
Optional Filter Plate (For Manifold Mount Filtration)
31.8
A5
B5
4.8
108
4.8
57.2
I-3
G1/4 PORT BOTH ENDS (WITH ADAPTER)
NOTE: These automatic shutoff valve decou- plers and operating handle must be used with a suitable pump which in- cludes a 4 port/3 position, P-blocked center (“A” & “B” connected to tank) directional control valve for operation of single or double acting systems. One automatic shutoff valve decou- pler can be used to operate only one double acting or one single acting cir- cuit. For operation of a single acting circuit, plug the decoupler outlet port “B” (as shown in the schematic).
139.5
DRILLED FOR M6 SHCS (3X)
119.3
77.1
30 73.3
50.8
32.9
A1
B1
C1
B2
SPACER - DISCARD IF BOTTOM MANIFOLD MOUNTED. FOR FILTRATION ADD 11,4 THICK FILTER PLATE
27
5.6
44.5
27
57.9
63.5
ILML56002
REV B
39.4
A
39.4
A
Pallet Decoupler Cover
40.6
40.6
Model No.
For use with Decoupler Models
A
ILML56011 REV A
ILML56011 REV A
L5-6008-03 8.9
L5-6005-42, L5-6005-43
Customers that have previously bought a decoupler can purchase a new cover for their old decoupler. New orders of decouplers will come with cover.
100 lb. Tensile Strength
www.vektek.com
1-800-992-0236
© Vektek February 2021
Made with FlippingBook - professional solution for displaying marketing and sales documents online