TREX® LIGHTING–POST SLEEVE/ CONTINUED Use information on the following tables to locate bracket and under rail light placements on post sleeves (with the exception for Select and Enhance Railing as noted) for desired railings being installed, post sleeves are not installed over pressure-treated posts until after this step is completed. DO NOT INSTALL BRACKETS AT THIS STEP.
TRANSCEND RAILING HORIZONTAL RAILING BRACKET AND UNDER RAIL LIGHT LOCATIONS
Bottom Bracket Location
Top Bracket Location 36"
Top Bracket Location 42"
Transcend Standard
5-1/2" 5-1/2”
35-1/16" 36-3/16”
41-1/16" 42-3/16”
Transcend Cocktail-Over the Post
5c
5a
Bottom of post sleeve
5-1/2"
See Table
5a. U sing table above, mark locations for brackets at all required locations.
5c. If installing a post sleeve that has a one-piece skirt, slide one-piece skirt over pressure-treated post.
5b
3-1/2"
5b. M easure 4" from bottom of post sleeve and drill a 1/2" hole under the location of the lower bracket being used.
Note: Do this at all locations where under-rail lighting is being installed.
11
LIGHT-OVERVIEW-1026
Made with FlippingBook Annual report maker