Trex® Lighting Installation Overview

TREX® LIGHTING–POST SLEEVE/ CONTINUED

SELECT / ENHANCE RAILING - UNDER RAIL LIGHT LOCATION

Note: For Select Classic, Select T-Rail, and Enhance Railings, brackets are installed on rails first so bracket placement does not apply here.

6a

6b. If installing a post sleeve that has a one-piece skirt, slide one-piece skirt over pressure-treated post.

2-1/4"

6a. F or Select Classic, Select T-Rail, or Enhance Composite railing, measure 2-1/4" from bottom of post sleeve, and drill 1/2" hole. Do this at all locations where under-rail lighting is being installed.

SIGNATURE - STANDARD / ROD RAIL / MESH RAIL, GLASS RAIL HORIZONTAL RAILING BRACKET AND UNDER RAIL LIGHT LOCATIONS Bottom Bracket Location Top Bracket Location 36"

Top Bracket Location 42"

Signature/Rod Rail/Mesh/Glass*–Horizontal Fixed Bracket

1-7/8"

34-1/2"

40-1/2"

7b

7a

Bottom of post sleeve

1-5/8"

1-7/8"

See Table

7a. U sing table above, mark locations for brackets at all required locations.

7b. Measure 1-5/8" from bottom of post sleeve and drill a 1/2" hole under the location of the lower bracket being used.

Note: Do this at all locations where under-rail lighting is being installed.

7c. If installing a post sleeve that has a one-piece skirt, slide one-piece skirt over pressure-treated post.

12

LIGHT-OVERVIEW-1026

Made with FlippingBook Annual report maker