HOW TO INSTALL SELECT ™ ALUMINUM RAIL HORIZONTAL PANEL/ CONTINUED
Attaching Brackets if using Pressure-Treated Posts with 4 x 4 Post Sleeves
Attaching Brackets if using Pressure-Treated Posts with 6 x 6 Post Sleeves
1
1
Install One-Piece Skirt and Post Sleeve 1. Slide one-piece skirt down to rest on decking surface. Slide post
1. Install post sleeve over pressure-treated post.
sleeve over post and position inside post sleeve skirt.
2
3
2
3
34-7/8" (88.6 cm) or 40-7/8" (103.8 cm)
3-9/16" (9.05 cm)
33-1/4" (84.5 cm) or 39-1/4" (99.7 cm)
2" (5.1 cm)
2. Measure up from top of decking surface 3-9/16". Mark with light line. 3. M easure up from top of decking surface 34 7/8" for 36" rail height or 40-7/8" for 42" rail height. Mark with light line.
2. Measure up from top of skirt 2". Mark with light line. 3. M easure up from top of skirt 33-1/4" for 36" rail height or 39-1/4" for 42" rail height. Mark with light line.
5
4
4
5
4. C enter lower bracket on post above the marked line and attach using two #10 X 1-3/4" stainless steel screws (included). 5. Center upper bracket on post above marked line and attach using four #10 X 1-3/4" stainless steel screws (included).
4. Center lower bracket on post above the marked line and attach using two #10 X 1-3/4" stainless steel screws (included). 5. Center upper bracket on post above marked line and attach using four #10 X 1-3/4" stainless steel screws (included).
6
6. Snap two-piece skirt over post sleeve.
3
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SEALHZ-0426
Made with FlippingBook Digital Proposal Creator