TREX SELECT ® ALUMINUM RAILING Horizontal Installation Instructions
HOW TO INSTALL SELECT ALUMINUM RAIL HORIZONTAL PANEL
Attaching Brackets if Using Select Aluminum Posts
Attaching Brackets if Using Pressure-Treated Posts with All-in-One Composite 4 x 4 Post Sleeves
1
2
1
Install One-Piece Skirt and Post Sleeve 1. Slide one-piece skirt down to rest on decking surface. Slide post sleeve over post and position inside post sleeve skirt.
34-7/8" (88.6 cm) or 40-7/8" (103.82 cm)
3-9/16" (9.05 cm)
3
2
1. M easure 3-9/16" up from deck surface. Mark with light line. 2. M easure 34-7/8" for 36" rail height or 40-7/8" for 42" rail height up from decking surface. Mark with light line.
33-9/16" (88.3 cm) or 39-9/16" (101.6 cm)
2-5/16" (5.8 cm)
4
3
2. Measure up from top of skirt 2-5/16". Mark with light line. 3. M easure up from top of skirt 33-9/16" for 36" rail height or 39-9/16" for 42" rail height. Mark with light line.
4
5
3. C enter lower bracket on post above the marked line and attach using two #10 x 3/4" self-drilling screws (provided) . 4. C enter upper bracket on post above marked line and attach using four #10 x 3/4" self-drilling screws (provided) .
4. Center lower bracket on post above the marked line and attach using two #10 X 1-3/4" stainless steel screws (included). 5. C enter upper bracket on post above marked line and attach using four #10 X 1-3/4" stainless steel screws (included).
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SEALHZ-0826
Made with FlippingBook Digital Proposal Creator