HOW TO INSTALL SELECT ALUMINUM RAIL HORIZONTAL PANEL/ CONTINUED Attaching Brackets if Using Pressure-Treated Posts with Aluminum 4 x 4 Post Sleeves Attaching Brackets if using Pressure-Treated Posts with 4 x 4 Post Sleeves
1
1
Install One-Piece Skirt and Post Sleeve 1. Slide one-piece skirt down to rest on decking surface. Slide post sleeve over post and position inside post sleeve skirt.
1. Install post sleeve over pressure-treated post.
3
2
3
2
33-5/8" (85.4 cm) or 39-5/8" (100.1 cm)
34-7/8" (88.6 cm) or 40-7/8" (103.8 cm)
2-3/8" (6.0 cm)
3-9/16" (9.05 cm)
2. Measure up from top of skirt 2-3/8". Mark with light line. 3. M easure up from top of skirt 33-5/8" for 36" rail height or 39-5/8" for 42" rail height. Mark with light line.
2. Measure up from top of decking surface 3-9/16". Mark with light line. 3. M easure up from top of decking surface 34 7/8" for 36" rail height or 40-7/8" for 42" rail height. Mark with light line.
5
4
4
5
4. Center lower bracket on post above the marked line and attach using two #10 X 1-3/4" stainless steel screws (included) . 5. C enter upper bracket on post above marked line and attach using four #10 X 1-3/4" stainless steel screws (included).
4. C enter lower bracket on post above the marked line and attach using two #10 X 1-3/4" stainless steel screws (included). 5. Center upper bracket on post above marked line and attach using four #10 X 1-3/4" stainless steel screws (included).
6
6. Snap two-piece skirt over post sleeve.
3
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SEALHZ-0826
Made with FlippingBook Digital Proposal Creator