Contenu Content
2 cartons-mousse noirs (50 x 76 cm) 1 rouleau de papier de riz (45,5 cm x 1 .22 m) 50 feuilles de papier construction noir (30 x 45 cm)
2 black foam boards ( 19.7 " x 29.9 " ) 1 roll of rice paper ( 18 " x 48" ) 50 sheets of construction paper
À 4 cm du côté le plus court du carton, découper
At 4 cm from the shortest side of the board, cut a 0.5 cm slit, up to the middle of the board, about 17 cm.
3.
une fente de 0,5 cm, jusqu’à la moitié du carton, c’est-à-dire à environ 17 cm.
( 11 .8 " x 17.7" ) 16 wood dowels ( 1.8" ) 100 Parisian fasteners Step-by-step instructions
16 chevilles en bois (30 cm de longueur)
100 attaches parisiennes Instructions étape par étape
Fabrication du castelet Building the puppet theatre
Dans la partie inférieure du cadre, découper deux fentes de 0.5 cm de 17 cm de longueur, à 4 cm du bord des côtés du carton- mousse.
In the lower part of the frame, cut two 0.5 cm slots, 17 cm long, 4 cm from the edge of the sides of the foam board.
4.
1.
Découper le centre du carton-mousse en gardant une bordure de 8 cm de chaque côté afin de créer un cadre.
Cut out the center of the foam board by keeping an 8 cm border on each side in order to create a frame.
Couper la partie découpée en deux. Tracer une diagonale à 10 cm du côté gauche, du haut du carton- mousse jusqu’au coin inférieur droit. Répéter avec l’autre morceau.
Cut the center piece in two. Trace a diagonal line at 10 cm from the left side, from the top of the foam board, to the inferior right corner. Repeat with the other piece.
2.
Fixer le papier de riz à l’endos du cadre avec du ruban-cache et assembler en insérant les pieds.
Affix the rice paper to the back of the frame with masking tape and assemble by inserting the feet.
5.
Made with FlippingBook - Online catalogs