Indicia positioning template for the small design
3.2 Indicia Size
The top and right hand edge of the indicia zone (as set out in the above indicia template) should be aligned exactly to the top and right hand edges of the envelope. The preferred clear zone round the Access indicia is 5mm, there is no minimum clear zone. However the entire indicia must be displayed on the envelope i.e. anything less than 100% of the indicia design on the envelope will constitute non- compliance. The Whistl unique licence number will be incorporated within the Royal Mail Access indicator for use by the customer. Mailings will not be accepted unless all mailing items show the licence number, which matches the account to which the mailing will be charged.
There are 2 specified sizes the customer can choose to use for their pre-printed envelopes. Note: where envelopes are not pre-printed with the Whistl indicia, only the small standard design indicia will be printed by the station machine. Customer indicator • Large customer indicator – maximum area available is 30mm tall x 50mm wide • Small customer indicator – maximum area available is 20mm tall x 50mm wide There is no minimum size for the customer indicator but it needs to be visible and any words used need to be in a font larger than 10 point. Any variation in size from that submitted by the customer will need to be checked through Whistl machinery before use.
Large PPI (‘S’) = 30mm tall & 15mm wide
Small PPI (‘S’) = 20mm tall & 15mm wide
Total length: 70mm
Total length: 61mm
7
Made with FlippingBook flipbook maker