Technical training
Blade Repair Standard / V4 2023-05-02
1. Find the SDS for the matrix material being used and identify the PPE required for the matrix material being used. Enter this information in the table below:
Type of gloves required
Type of mask required
Type of mask filter required
Other PPE required
2. Find the TDS for the matrix material being used and use this to calculate the amount of matrix required for the panel. Enter the information in the table below:
Total amount of matrix
Mixing ratio
Amount of matrix base
Amount of matrix hardener
Curing time for matrix
Curing temperature for matrix
6.
Exercise 5 - Panel assembly 1.
Carefully weigh out and thoroughly mix the material.
2.
Apply a thin layer of matrix material onto the gelcoat on the mould.
3.
Apply the first layer(s) of glass fibre onto the gelcoat on the mould.
4. Apply matrix to the glass fibre, and thoroughly wet out the glass using a bolt roller, ensuring the fibres are straight.
5. Apply the core material to the first layer of glass and apply a thin layer of matrix on top of the core material.
Global Wind Organisation©2023 / www.globalwindsafety.org
142 / 157
Made with FlippingBook - professional solution for displaying marketing and sales documents online