Technical training
Lift Standard / V3 2023-05-02
After successfully having completed Lesson 16 of the Lift Commission, Inspection, Installation and Maintenance Module: 164) The participants can take responsibility of installing and inspecting a supply cable and cable bin as described in the relevant manuals (Skills, intermediate level)
ELEMENT 16.1 - FEED-IN OF SUPPLY CABLE
Learning objectives:
165) The participants can explain how to do a visual inspection of the feed in of a supply cable (Knowledge, intermediate level) 166) The participants can perform a re-installation of the feed in of a supply cable following relevant instructions and manual (Skills, intermediate level)
The instructor shall:
Demonstrate how to inspect and re-install feed in of a supply cable in accordance with the relevant manuals
Facilitate practical training on re-installing feed in of a supply cable and provide feedback to the participants on their performance
Lead or facilitate discussion on safety issues in relation to inspecting and re-installing feed in of a supply cable
The participants shall:
Engage in the practical training, reflect on the received feedback, and take active part in discussions and share experiences from working with feed in of a supply cable
ELEMENT 16.2 - STRAIN RELIEF
Learning objectives:
167) The participants can explain how to do a function test on a strain relief on the cabin (Knowledge, intermediate level) 168) The participants can perform an adjustment and replacement of a strain relief at the cabin according to the relevant manuals (Skills, intermediate level)
Global Wind Organisation©2023 / www.globalwindsafety.org
144 / 171
Made with FlippingBook flipbook maker