CONTURO Edge Bander booklet

If the fuel pump symbol appears on the display or there is not enough glue to affix the edging, refill the ma- chine as follows before starting the next gluing process: Refilling glue



Press the refill button and wait until the glue feed has moved back. The display now indicates that the machine is in refill mode. Wait until the hourglass symbol has disappeared before opening the flap.

Lift the flap as soon as the open symbol appears.



Place the new glue cartridges (of the same colour) into the magazine.

Close the flap again and wait until the glue feed moves forward and exerts pressure on the cartridges. The refill process is now complete and you can continue working with the CONTURO.


Made with FlippingBook - Online catalogs