666273 Rev I Dental Implant Catalog

View industry leading, USA manufactured Sterngold implant systems-- MOR® Mini Implants, TRU®/PUR® Conical and Internal Hex Implants-- and their prosthetics, equipment and surgical protocols.

IMPLANT SYSTEMS

Sterngold Dental

Sterngold | Implant Systems Catalog

TABLE OF CONTENTS

Why Sterngold?........................................................................................................................................................................3 Return Policy and Company Certifications ............................................................................................................4 Sterngold Implants Surface – Treatment ................................................................................................................5 PUR® Implant System ..........................................................................................................................................................6 PUR® Implant System Surgical Kit and Instruments ....................................................................................7-9 PUR® Implant System Prosthetics ......................................................................................................................10-15 PUR® Surgical Protocol .............................................................................................................................................16-20 TRU® Implant System .......................................................................................................................................................21 TRU® Implant System Surgical Kit and Instruments ...............................................................................22-24 TRU® Implant System Prosthetics ......................................................................................................................25-31 TRU® Surgical Protocol ..............................................................................................................................................32-36 TRU® & PUR® Guided Surgery ...............................................................................................................................37-54 MOR® Implant System .....................................................................................................................................................55 MOR® Implant System Surgical Kit and Instruments ....................................................................................56 MOR® Implant System Prosthetics ....................................................................................................................57-59 Surgical Motors ....................................................................................................................................................................60 Contact Information .........................................................................................................................................................61

Additional tool purchases may be required for certain prosthetic systems. Visit www.sterngold.com for more information.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

Sterngold Dental

Sterngold® | Implant Systems Catalog

Affordable Dental Access. Enhanced Quality of Life.

Why Sterngold?

Affordability Affordability and quality merge in our products so you can remain competitive by providing advanced treatments, with the opportunity to generate a good rate of return.

Access Access to our full range of quality, up-to-the-minute, precision-engineered, yet affordable products.

Access to our full pre- and after-sales support, through technical and educational expertise, well-informed sales insights, industry collaboration, and first-rate customer service.

Helping improve quality of life We carry restorative dental products that, by nature, aim to enhance quality of life. What’s in it for you?

Dental Practice We empower the achievement of your practice goals: patient satisfaction, treatment effectiveness, and business growth.

Dental Laboratory We enable you to stay competitive in the changing landscape of dental technology.

About Us Sterngold Dental, LLC, is a global player with a rich and celebrated history in the dental community. We are recognized by the name Sterngold Dental and the shorter reference, Sterngold. While forward looking, Sterngold credits its solid reputation in restorative dentistry, in particular, and in providing quality products for the dental community, in general, to its storied history that traces back to 1897. Thriving for over a century and a quarter speaks volumes on ability and credibility and the milestones are many.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

Sterngold Dental

Return Policy and Company Certifications

RETURN POLICY

STERNGOLD DENTAL, LLC'S QUALITY POLICY STATEMENT

Please review your invoice and products before opening the package.

• We will provide our customers with consistent, superior products, components, and accessories at competitive prices, on time. • We ensure that our products and services meet or exceed the requirements of the Quality System guided by ISO 13485:2016 and the Canadian Medical Device Regulations, MHLW Ministerial Ordinance No. 169, Brazil ANVISA RDC, Korean Medical Device Act and KGMP requirements and the Food and Drug Administration’s Quality System Regulations and Current Good Manufacturing Practices. • We will strive for continued development of the Quality Management System and to meet or exceed all customer expectations.

All returns must have prior authorization from Sterngold. Please call our Customer Service Department at 800-243-9942, or send an e-mail to customerservice@sterngold.com, to obtain a return authorization number and clearly write the issued number on the outside of the Shipping package. All unopened products must be in resalable condition. A copy of the invoice or packing slip must be enclosed with the return. Return freight costs are the Customer's responsibility. Sterngold is not responsible for any lost or damaged products returned to us. Please allow 2 to 4 weeks for return processing. No credit will be provided for freight costs on original invoice. ATTACHMENTS, IMPLANTS AND CONSUMABLES No returns are accepted after 180 days from purchase date. Any unopened product returned within 30 days of the invoice date will not incur a restocking fee. After 30 days from date of purchase, there will be a 15% restocking fee. A 20% restocking fee will be charged after 60 days and a 50% restocking fee after 90 days, from date of purchase. For implant fixtures, a one-time courtesy exchange will be honored for any bulk quantity purchases over 15 units. The exchange must take place within 6 months from date of purchase. ALLOYS Our 30-day product guarantee on all alloys permits the return of metal in quantities of 5-ounces or less. When returned within 30 days, credit will be issued at the original invoice price for the quantity of material returned (including buttons). Unopened metal returned within 30 days from delivery date will be issued credit at 20% off the original invoice price or intrinsic based on the current market, whichever is lower. OSHA REGULATIONS: To comply with Federal Regulations and Sterngold's infection control program, all items not returned in their original, unopened packaging must be disinfected and shipped in compliance with current OSHA rules. Failure to follow OSHA regulations will result in your package being returned at your expense. Items which can be used in the mouth must be disinfected and repackaged in a heat sealed envelope labeled with a notice of disinfection.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

Surface Treatment

Sterngold Implants Surface Treatment

roughness. This promotes cell attachment as seen in the scanning electron microscope (SEM) picture of the SGE surface of Sterngold implants in figures 1through 9. Roughness is measured with an average roughness (Ra), while the most commonly used parameter for describing roughness is calculated in microns. The rough surfaces produced by grit- blasting have irregular geometries with Ra value of 3.0 μm, which is considered optimal for the osseointegration process.

The surface of bone and dental implants plays an important role in osteoblast adhesion and bone growth. Many factors affect the quality of osseointegration, including chemical composition and surface morphology. Studies have shown that roughened surfaces are more favorable for bone formation and faster osseointegration compared to implants with smooth surfaces. The SGE surface is produced using a large-grit sandblasting technique that generates a macro-roughness on the titanium surface followed by an acid-etch bath, which produces the micro-

Figure 1

TRU®/PUR® Dental Implant SEM – Scanning Electron Microscopy

Figure 2

TRU®/PUR® Dental Implant SEM – Scanning Electron Microscopy

Figure 3

TRU®/PUR® Dental Implant - EDS EDS - Energy Dispersive X-ray Spectroscopy

Figure 5

MOR® Dental Implant SEM – Scanning Electron Microscopy

Figure 4

MOR® Dental Implant SEM – Scanning Electron Microscopy

Figure 6

MOR® Dental Implant EDS - Energy Dispersive X-ray Spectroscopy

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System True Value. Pure Performance

PUR®

The PUR® implant system is designed to be simple to use, while also providing predictable clinical results. The precision manufacturing of the PUR® produces the highest quality implants and prosthetic components, at an excellent value to the clinician.

The implant body design is a self-tapping screwtype, with a double lead thread pattern, and micro threads at the top, making it ideal for achieving immediate stability. The PUR® features the SGE surface treatment for expedited osseointegration. The implant does not require a mount and is delivered to the mouth directly with the Implant Driver. The bone-level, internal connection PUR® Implant is substantially equivalent to the Zimmer® Tapered Screw-Vent®* connection. • Simple, Predictable, Reliable • Quality In Pure Performance • Provides Strong Initial Stability • Diameters: 3.2mm, 3.5mm, 4.3mm (NP) Silver** • Diameters: 5.0mm, 6.0mm (RP) Blue** • Lengths of 8mm, 10mm, 12mm, 14mm • SGE Surface Treatment (Titanium) • Mountless Delivery • Comes in an All-In-1 Bundle • Made in the USA

All implants are packaged with cover screw

3.2mm

3.5mm 4.3mm 5.0mm 6.0mm

Body Diameter

3.2mm (NP)

3.5mm (NP)

4.5mm (RP)

Prosthetic Connection

8mm length

901382

901356

901360

901365***

901369***

10mm length

901383

901357

901361

901366***

901370***

12mm length

901390

901358

901362

901367***

N/A

901391

901359

901363

N/A

14mm length

* Zimmer Screw-Vent® is a registered trademark of Zimmer Biomet. **5.0mm available in lengths of 8, 10, and 12mm 6.0mm available in lengths of 8, and 10mm

*** DENOTES ANODIZED PART

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Surgical Instruments

PUR®

TRU®/ PUR® SURGICAL KIT

905299

Kit includes instruments to place PUR® and TRU® Implants

The enhanced TRU/PUR Implant System Surgical Kit includes: Lance Drill, 2.0mm, 2.7mm, 3.0mm, 3.8mm, 4.5mm, 5.5mm Drills, Lindemann Drill, 3.5mm, 4.3mm, 5.0mm, 6.0mm Bone Taps, 3.2mm, 3.5mm, 4.3mm, 5.0mm, 6.0mm Crestal Bone Drills, Torque Wrench, Parallel Pin (4), Drill Extender, Thumb Knob, .050" Hex Latch Driver, .050" Hex tool, Long Driver, Implant Driver Wrench (short and long).

Lance Pilot Drill 903014 • The Lance Pilot drill is used to penetrate the cortical bone in order to mark the site and to guide the subsequent drills.

TRU® / PUR® 2.0mm Pilot Drill 6, 8, 10, 12, 14, 16mm 905288

SURGICAL DRILLS • Useful laser markings are on the drills (6, 8, 10, 12, 14, and 16mm). • Irrigate to control temperature. • All drilling should be performed at low speeds (1000 to 1500 RPM) to maintain bone temperature as low as possible. TRU®/PUR® 2.7mm Twist Drill 6, 8, 10, 12, 14, 16mm 905219 TRU®/PUR® 3.0mm Twist Drill 6, 8, 10, 12, 14, 16mm 905289 TRU®/PUR® 3.8mm Twist Drill 6, 8, 10, 12, 14, 16mm 905290 TRU®/PUR® 4.5mm Twist Drill 6, 8, 10, 12, 14, 16mm 905291 TRU®/PUR® 5.5mm Twist Drill 6, 8, 10, 12, 14, 16mm 905292

PARALLELING PIN 2.0mm/3mm 905282 • The Paralleling Pins can be placed into the osteotomy to help identify angulation and depth.

BONE TAPS • An instrument for cutting a screw thread inside the osteotomy.

905293 905294 905296 905297 905256

PUR® 3.2mm Tap

TRU®/PUR® 3.5mm Tap TRU®/PUR® 4.3mm Tap TRU®/PUR® 5.0mm Tap TRU®/PUR® 6.0mm Tap

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Surgical Instruments

PUR®

PUR® IMPLANT DRIVER - LATCH

905287

IMPLANT DRIVER, WRENCH Long

905263 905322

Short

.050 HEX" LATCH DRIVER

905023

DRILL EXTENDER

905280

• Used to install Sterngold’s surgical and prosthetic components. • Excellent for difficult to reach areas.

• Increases length of drill by 18mm. • Attaches to standard latch type handpiece.

.050" HEX TOOL LONG .050" HEX TOOL SHORT

905229 905228

T HUMB KNOB

905213

• Used for hand tightening of torque wrench tools.

GRADUATED TORQUE WRENCH

905738

• Features both a torque and ratchet function. • Torque to 10-70Ncm.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Surgical Instruments

PUR®

LINDEMANN DRILL

903015

• Placement of vertical groove to facilitate planned implant orientation • Enlargement of crestal 1/3 of osteotomy • Angle correction following 2mm twist drill

DENSE BONE DRILLS

• For uniformly dense bone

905289 905336 905337 905338 905339

3.0 mm TRU/PUR Twist Drill 6, 8, 10, 12, 14, 16mm 3.25 mm Dense Bone Drill 6, 8, 10, 12, 14, 16mm 4.05 mm Dense Bone Drill 6, 8, 10, 12, 14, 16mm 4.75 mm Dense Bone Drill 6, 8, 10, 12, 14, 16mm 5.75 mm Dense Bone Drill 6, 8, 10, 12, 14, 16mm

CRESTAL BONE DRILLS

• For superior cortical bone

905522 905523 905524 905525 905526

3.2 mm Crestal Drill 3.5 mm Crestal Drill 4.3 mm Crestal Drill 5.0 mm Crestal Drill 6.0 mm Crestal Drill

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Prosthetics

PUR®

STRAIGHT ABUTMENTS (TITANIUM) Narrow Platform

Regular Platform

904775 * 904776 *

904773 904774

1.5mm cuff 3.0mm cuff

.050" Prosthetic Screw Included

*WAXING SCREWS Short, Hex

UCLA GOLD ABUTMENTS Narrow Platform

904654 904655

Regular Platform

904781 904783

904782 904784

Long, Hex

Hexed

Non-Hexed

.050" Prosthetic Screw Included

HEALING ABUTMENTS .050" Narrow Platform

Regular Platform

901447 * 901449 *

901446 901448

3.0mm 5.0mm

ANGLED ABUTMENTS 15° Ti Esthetic (NP)

907121 907122

15° Ti Esthetic (RP)

IMPRESSION COPINGS PUR Impression Coping (NP)** PUR Impression Coping (RP)**

.050" Prosthetic Screw Included

904771 904772*

Stern SNAP® Impression Coping 904961 ERA® Micro Overdenture Impr.Coping 811236

** PUR impression Copings are combined open-tray and closed-tray.

IMPLANT ANALOGS Narrow Platform (NP) Regular Platform (RP) Stern SNAP® Analog

904533 904534 904962 811042 811001

ERA® Micro Ovd. Processing Jig

ORA Processing Jig

*Install with .050" Hex Driver.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Prosthetics

PUR®

ORA IMPLANT ABUTMENTS Narrow Platform

Regular Platform

904340 904341 904342 904343 904344

904345 904346 904347 904348 904349

1.0mm Cuff 2.0mm Cuff 3.0mm Cuff 4.0mm Cuff 5.0mm Cuff

ORA RETAINING CAP

904064

MULTI-UNIT ABUTMENTS (1) 0° 1mm H (NP)

907126 907127 907123 907124

ORA RETAINING RING

904002

0° 2mm H (NP) 17° 2mm H (NP) 17° 3mm H (NP) 30° 3mm H (NP)

ORA PROCESSING JIG

811001

907125 (1) Angled Multi-Unit Abutments include Angled Abutment Screw. Prosthetic screw sold separately.

ORA IMPLANT ABUTMENT, .096" HEX DRIVER

904066

MULTI-UNIT ABUTMENT ANALOG

907129

WHITE O-RINGS, 5PK

909012

MULTI-UNIT TEMPORARY ABUTMENT Ti

907133

.050" Prosthetic Screw included.

*SCAN BODIES Narrow Platform PUR® Scan Body Regular Platform PUR® Scan Body

904790

MULTI-UNIT TEMPORARY HEALING CAP

907132

.050" Prosthetic Screw included.

904791 *PUR Scan Bodies packaged with PUR Prosthetic Screw 904653 and is used for both RP & NP.

DIGITAL SPACERS Standard ERA®

904399 904400 914398 914407

Micro ERA®

MULTI-UNIT IMPRESSION COPING (OPEN TRAY)

ORA

907130

Stern Snap®

.050" Guide Pin included.

*TI BASES Narrow Platform PUR® Ti Base Regular Platform PUR® Ti Base

904792

904793

MULTI-UNIT PROSTHETIC SCREW

907131

*PUR Ti Bases packaged with PUR Ti Base Prosthetic Screw 904719 and is used for both RP & NP.

PUR® PROSTHETIC SCREW .050 HEX Narrow & Regular Platform 904653

ANGLED MULTI-UNIT ABUTMENT SCREW

907128

Install with .050" Hex Driver

PUR® TI BASE PROSTHETIC SCREW .050 HEX Narrow & Regular Platform 904719

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Prosthetics

PUR®

ERA® IMPLANT ABUTMENTS (MICRO) Narrow Platform

ERA® IMPLANT ANGLED ABUTMENTS (MICRO) Narrow Platform Regular Platform 0.6mm Cuff 812877 0.6mm Cuff

Regular Platform

812873 812874 812875 812792 812876 812813

812881 812882 812883 812794 812884 812815

812885 812886 812887 812793 812888 812814

0.5mm Cuff 2mm Cuff 3mm Cuff 4mm Cuff 5mm Cuff 6mm Cuff

812878 812879 812791 812880 812812

2mm Cuff 3mm Cuff 4mm Cuff 5mm Cuff 6mm Cuff

ERA® Micro Female

MICRO IMPLANT ABUTMENT TOOL KIT

811907

811212 811213 811214 811215 811252 811253

0° 5°

11° 17° 23° 30°

THUMB KNOB

905213

ERA SOCKET INSERT, MICRO 30°

905340

ERA® MICRO MALE PACKAGE

811008

ERA MICRO CORE CUTTER BUR

811023

ERA MICRO SEATING TOOL

811022

ERA MICRO ALIGNMENT HANDLES (2)

811456

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Prosthetics

PUR®

SNAP® ONE-PIECE IMPLANT ABUTMENTS (Torque to 30 Ncm) Narrow Platform Regular Platform 1mm Cuff 904560 1mm Cuff 904564 2mm Cuff 904561 2mm Cuff 904565 3mm Cuff 904562 3mm Cuff 904566 4mm Cuff 904563 4mm Cuff 904567 STERN SNAP® ABUTMENT BASES* (Torque to 30 Ncm) Narrow Platform Regular Platform 2.5mm Cuff 904925 3.0mm Cuff 904953 3.5mm Cuff 904926 4.0mm Cuff 904954 4.5mm Cuff 904927 5.0mm Cuff 904955

ZEST LOCATOR® IMPLANT ABUTMENTS* Narrow Platform

(Torque to 30 Ncm)

Regular Platform

08672 08673 08674 08675

08662 08663 08664

LOCATOR® MALE PROCESSING PKG 2pk

08519-2 08519-10

10pk

LOCATOR® EXT RANGE MALE PROCESS PKG 2pk 08540-2 10pk 08540-10 LOCATOR® PROCESSING SPACER 4pk 08569 20pk 08569-20

*Choose one and add 904123 below for each abutment base ordered and appropriate retaining caps pictured below .

SNAP® ANGLED ATTACHMENT • When ordering the Stern Snap Angled attachment, you must also choose an Abutment Base for the appropriate Implant System. The Stern Snap screws into the Abutment Base to provide a connection to an overdenture. • Torque to 20Ncm 904123

STERN SNAP® DENTIST TOOLKIT • 1 Removal Tool, 1 Flat Blade Square Driver, 1 .050 Hex Tool, short, tapered.

LOCATOR® CORE TOOL 08393

904129

SNAP® RETAINING CAPS-METAL FREE Assortment 904130 Yellow 904134 Green 904135 Brown 904136

LOCATOR® FEMALE ANALOG (4MM) 4pk 08530 20pk 08530-20 LOCATOR® FEMALE ANALOG (5MM) 4pk 08516 20pk 08516-20 LOCATOR® SQUARE DRIVER TORQUE WRENCH 15mm 08926 21mm 08927

LOCATOR® IS A REGISTERED TRADEMARK OF ZEST IP HOLDINGS, LLC, AND THE LOCATOR® IMPLANT ATTACHMENT SYSTEM IS MANUFACTURED BY ZEST DENTAL SOLUTIONS.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Prosthetics

PUR®

EZ PickUp® Attachment Processing Material Tissue-colored, automixing, self-curing attachment processing material. • Odorless • Low curing temperature

• Less than 1 percent shrinkage resulting in a more accurate and complete pickup of the attachment • Unlike methyl methacrylate, does not irritate freshly sutured tissue. • Can be used to pick up any attachment • EZ PickUp® will chemically bond to acrylic only if a primer is used. Use SternVantage™ Varnish LC as a primer for acrylic.

EZ PickUp®, Syringe, Tips & Varnish

220237

1 syringe @ 15 grams, 15 Tips and 5.0ml Varnish

EZ PickUp®, Syringe & Tips 1 syringe @ 15 grams and 15 Tips

220235

EZ PickUp® Tips (15)

220233

SternVantage™ Varnish LC 5ml 220232 SternVantage™ Varnish LC is a light cure one-component surface coating material based on acrylates and cures without a smear layer caused by oxygen inhibition • Solvent and stain resistant • Ultra-dry finish with a smooth surface • Produces a high gloss and hard surface with no polishing necessary

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Implant System Prosthetics

PUR®

Quickline® Soft-Reline material QuickLine®, the long-term soft relining material, can be directly applied from its automix cartridge. The self-curing silicones allow for easy working, either using a direct or indirect lining procedure. Adhesion to the usual PMMA based materials for dentures is achieved by a specially developed highly active primer. • Biocompatible, no methyl methacrylate • Tasteless and odorless • Requires no extra work in the laboratory • Automixing cartridge delivery system for fast, easy and mess-free application • Permanently soft for increased patient comfort

• Self-curing • Color stable • Can be used on any standard resin for prosthetics • Dispenses with 1:1/2:1 Dispensing Gun

Quickline® - Introductory Kit 220180 1 cartridge (50 ml) QuickLine®,12 mixing tips, 2 bottles (10ml) (base and catalyst),Varnish, 1 bottle Primer (5 ml), 25 brushes, 1 mixing palette

Quickline® refill

220181

1 cartridge QuickLine® @ 50 ml, 12 mixing tips

Quickline® primer

220183

1 bottle Primer, 5 ml • Easy to use • Quick set up solvent evaporates in 1 minute • Provides adhesion between PMMA based material used for dentures and self-curing silicone

Quickline® Varnish 220182 2 bottles (base and catalyst), 10 ml each, 25 brushes, 1 mixing palette • Easy to use • Provides a glossy and lasting surface • Reduces plaque retention

• Reduces stain and odor build-up • Reapplicable for extended use • Quick drying time (5 minutes)

Quickline® mixing tips (50)

220162

Silicone Trimming Bur

811003

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Surgical Protocol

PUR®

STANDARD PLACEMENT

PUR® DRILL SEQUENCE

Implant Diameter

3.2mm body diameter

3.5mm body diameter

4.3mm body diameter

5.0mm body diameter

6.0mm body diameter

PUR ® Drill Sequence PUR ® Drill Sequence Recommended Speed 1,000-1,500 RPM (Paralleling Pin is for guide only )

Bone Taps (3.2, 3.5, 4.3, 5.0, 6.0mm)

Implant Driver Hex Drivers

Recommended Speed 15-30 RPM

Recommended torque not to exceed 55Ncm

PUR® DRILL DEPTH

FINAL DRILLING STEPS

Final Drilling step when placing the 3.2mm PUR® Implant When placing the 3.2mm PUR® Implant, enlarge the osteotomy using the 2.7mm Drill. If the bone is very dense, create internal threads in the osteotomy using the unique PUR® 3.2mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 3.5mm PUR® Implant Enlarge the osteotomy using the 3.0mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique PUR® 3.5mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 4.3mm PUR® Implant Enlarge the osteotomy using the 3.8mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique PUR® 4.3mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 5.0mm PUR® Implant Enlarge the osteotomy using the 4.5mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique PUR® 5.0mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 6.0mm PUR® Implant Enlarge the osteotomy using the 5.5mm drill. If the bone is very dense, create internal threads in the osteotomy using the unique PUR® 6.0mm Titanium Bone Tap at 15-30 RPM.

Note: The TRU® and PUR® drills are not true-to -depth, the drill tip should not be included in determining the final depth of the osteotomy in coordination with indicator lines on each drill.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR®

PUR® Surgical Protocol

STANDARD PLACEMENT

LANCE DRILL

TWIST DRILL

16 mm

1200 RPM

Clear the implant site by using a tissue punch or flap. Penetrate the cortical bone using the Lance Drill to mark the site and to guide the subsequent drills.

Penetrate the bone to the appropriate depth using the 2.0mm drill. Depth markings are on the drill (6, 8, 10, 12, 14 and 16mm). Lance drill and 2.0mm Twist drill: 1000- 1500rpm. All other drills: 10rpm or less. Irrigate to control temperature.

PARALLELING PIN

FINAL DRILLING TO FULL DEPTH

Direction Indicator

Place a Paralleling Pin into one osteotomy and use this as a guide to help align with other implant sites. The Paralleling Pin can also be used as a depth gauge.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Surgical Protocol

PUR®

STANDARD PLACEMENT

IMPLANT DRIVER

The PUR® Implant Driver is used to drive all PUR® implants. Insert at 15-30 RPM, with torque not to exceed 55 Ncm. Once the implant is completely seated, pull to remove the driver from the implant.

PUR® implants are packaged without an Implant Mount attached. The PUR® Implant Drivers are used to carry the implant from the package to the surgical site and to drive the implant into the bone. Simply press the appropriate driver into the implant until the hex area on the driver engages the hex inside the implant.

Fully seated PUR® Implant

COVER SCREW

HEALING ABUTMENT

The appropriate PUR® Cover Screw may be used if this is to be a two-stage surgery. Tighten the cover screw with a .050” hex driver.

If this is to be a one-stage surgery, the appropriate PUR® Healing Abutment is placed and tightened using a .050” hex driver.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Optional Instrumentation for Case Specific Indication

PUR®

If implant placement was attempted and only one-half or two-thirds of the implant seated within the osteotomy, use these optional Crestal or Dense Bone drills: DENSER BONE DRILLING – OPTIONAL PROTOCOL

Implant Diameter

3.2mm body diameter

3.5mm body diameter

4.3mm body diameter

5.0mm body diameter

6.0mm body diameter

Optional PUR ® Drill Sequence (Dense Bone) Recommended Speed 1,000-1,500 RPM (Paralleling Pin is for guide only )

Lindemann Drill (For angle correction following 2mm pilot if needed)

Bone Taps (3.2, 3.5, 4.3, 5.0, 6.0mm)

(Denser bone drilling options) Crestal Drills

Recommended Speed 15-30 RPM

Denser Bone Drilling Optional Recommendations

DENSE BONE DRILLS FOR UNIFORMLY DENSE BONE

BONE TAP FOR BONE THREADING IN DENSE BONE

16mm 14mm 12mm 10mm 8mm 6mm

CRESTAL BONE DRILLS FOR DENSE OR SUPERIOR CORTICAL BONE

LINDEMANN DRILL FOR WIDENING OR PATH INSERTION CORRECTION

DENTAL IMPLANTS

WWW.STERNGOLD.COM

PUR® Surgical Protocol

PUR®

Single Stage Protocol Considerations

• Torque recommendation for single stage surgery with healing abutment placement: 35 – 55 Ncm of initial stability of implant is recommended.

• Soft tissue matures while the bone interface is healing.

• Higher location of the implant-abutment connection may reduce some of the early crestal bone loss.

Surgical Note Recommendation

Recommendations for Implant Placement Documenting: • Implant location, implant type, platform diameter, implant length /size • Difficulties encountered during placement, if any • All materials used during surgery (documentation of LOT no. / batch no.) • Primary stability using standardized measurements or descriptive criteria • Size and type of abutment placed • Any recommendations, instructions or advice given to the patient about the surgical treatment

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System True Value. Pure Performance

TRU®

The TRU® implant system is designed to be simple to use, while also providing predictable clinical results. The precision manufacturing of the TRU® produces the highest quality implants and prosthetic components, at an excellent value to the clinician.

The implant body design is a self-tapping screwtype, with a double lead thread pattern, and micro threads at the top, making it ideal for achieving immediate stability. The TRU® features the SGE surface treatment for ex- pedited osseointegration. The implant does not require a mount and is delivered to the mouth directly with the Implant Driver. The bone-level, internal connection TRU® Implant is substantially equivalent to the Nobel Replace® Conical Connection*.

• Simple, Predictable, Reliable • Quality at True Value

• Provides Strong Initial Stability • SGE surface treatment (Titanium) • Diameters**: 3.5mm, 4.3mm, 5.0mm, 6.0mm • Lengths of 8mm, 10mm, 12mm, 14mm • Mountless Delivery • Comes in an All-In-1 Bundle • Made in the USA

All implants are packaged with cover screw

Body diameter

3.5mm 4.3mm 5.0mm 6.0mm

Prosthetic connection 3.5mm (NP)

4.5mm (RP)

901344 ***

901348 ***

901352 ***

8mm length

901340 ***

901345 ***

901349 ***

901353 ***

10mm length

901341 ***

901346 ***

901350 ***

N/A

12mm length

901342 ***

901347 ***

N/A

14mm length

901343 ***

* Nobel Replace® Connection is a registered trademark of Nobel Biocare™. **5.0mm available 8,10,12mm lengths/6.0mm available in 8 and 10mm lengths.

*** DENOTES ANODIZED PART AND COVER SCREW *** DENOTES ANODIZED PART AND COVER SCREW

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Surgical Instruments

TRU®

TRU®/PUR® SURGICAL KIT 905299 Kit includes instruments to place PUR® and TRU® Implants

Enhanced TRU/PUR Implant System Surgical Kit includes: Lance Drill, 2.0mm, 2.7mm, 3.0mm, 3.8mm, 4.5mm, 5.5mm Drills, Lindemann Drill, 3.5mm, 4.3mm, 5.0mm, 6.0mm Bone Taps, 3.2mm, 3.5mm, 4.3mm, 5.0mm, 6.0mm Crestal Bone Drills, Torque Wrench, Parallel Pin (4), Drill Extender, Thumb Knob, .050" Hex Latch Driver, .050" Hex tool, Long Driver, Implant Driver Wrench (short and long).

Lance Pilot Drill 903014 • The Lance Pilot drill is used to penetrate the cortical bone in order to mark the site and to guide the subsequent drills.

TRU® / PUR® 2.0mm Pilot Drill 6, 8, 10, 12, 14, 16mm 905288

PARALLELING PIN 2.0mm/3mm 905282 • The Paralleling Pins can be placed into the osteotomy to help identify angulation and depth.

BONE TAPS • An instrument for cutting a screw thread inside the osteotomy.

905293 905294 905296 905297

TRU®/PUR® 3.5mm Tap TRU®/PUR® 4.3mm Tap TRU®/PUR® 5.0mm Tap TRU®/PUR® 6.0mm Tap

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Surgical Instruments

TRU®

TRU® IMPLANT DRIVER, WRENCH Narrow Platform

TRU® IMPLANT DRIVER - LATCH Narrow Platform

Regular Platform

905320 905261

905321 905262

905285

905286

Short Long

.050" HEX LATCH DRIVER 905023 • Used to install Sterngold’s surgical and prosthetic components • Excellent for difficult to reach areas

DRILL EXTENDER

905280

• Increases length of drill by 18mm • Attaches to standard latch type handpiece

.050" HEX TOOL LONG

905229 905228

THUMB KNOB

905213

• Used for hand tightening of torque wrench tools.

.050" HEX TOOL SHORT

GRADUATED TORQUE WRENCH

905738

• Features both a torque and ratchet function • Torque to 10-70Ncm

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Surgical Instruments

TRU®

LINDEMANN DRILL

903015

• Placement of vertical groove to facilitate planned implant orientation • Enlargement of crestal 1/3 of osteotomy • Angle correction following 2mm twist drill

DENSE BONE DRILLS

• For uniformly dense bone

905289 905336 905337 905338 905339

CRESTAL BONE DRILLS

• For superior cortical bone

905522 905523 905524 905525 905526

3.2 mm Crestal Drill 3.5 mm Crestal Drill 4.3 mm Crestal Drill 5.0 mm Crestal Drill 6.0 mm Crestal Drill

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Prosthetics

TRU®

STRAIGHT ABUTMENTS (TITANIUM) Narrow Platform

Regular Platform

904003 904006

904005 904008 *

1.5mm cuff 3.0mm cuff

Includes prosthetic screw

IMPLANT ANALOGS Narrow Platform (NP) Regular Platform (RP) Stern SNAP® Analog ERA® Micro Overdenture Processing Jig

904545 904544 904962

UCLA GOLD ABUTMENTS Narrow Platform

Regular Platform

904032 904035

904033 904036

Hexed

Non-Hexed

811042

Includes prosthetic screw

811001

ORA Processing Jig

WAXING SCREWS Narrow Platform

Regular Platform

904658 904660

904659 904661

Long, Hex Short, Hex

ANGLED ABUTMENTS 15° TRU Ti Esthetic (NP) 15° TRU Ti Esthetic (RP)

907134 907135

Includes prosthetic screw

HEALING ABUTMENTS Narrow Platform

Regular Platform

901438 901440

901437 3.0mm 901439 5.0mm

3.0mm 5.0mm

IMPRESSION COPINGS TRU Impression Coping (NP)** TRU Impression Coping (RP)**

904015 904017 904961 811236

.050" Prosthetic Screw Included

Stern SNAP® Impression Coping ERA® Micro Overdenture Impr. Coping ** TRU impression Copings are combined open-tray and closed-tray.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Prosthetics

TRU®

MULTI-UNIT ABUTMENTS*

907140 907141 907136 907137 907138 907139 907146 907147 907142 907143 907144 907145

0° 1 .5mm H (NP) 0° 2.5mm H (NP) 17° 2.5mm H (NP) 17° 3.5mm H (NP) 30° 3.5mm H (NP) 30° 4.5mm H (NP) 0° 1.5mm H (RP) 0° 2.5mm H (RP) 17° 2.5mm H (RP) 17° 3.5mm H (RP) 30° 3.5mm H (RP) 30° 4.5mm H (RP)

* Angled Multi-Unit Abutments include Angled Abutment screw. Prosthetic Screw sold separately.

MULTI-UNIT OPEN TRAY TEMPORARY ABUTMENT Ti

MULTI-UNIT ABUTMENT ANALOG

907129

907153

Screw Included. Install with Unigrip™ Driver.

*MULTI-UNIT IMPRESSION COPING (OPEN TRAY)

MULTI-UNIT TEMPORARY HEALING CAP

907152

907130

Install with Unigrip™ Driver.

*.050" Guide Pin included.

NP ANGLED MULTI-UNIT ABUTMENT SCREW 907148

MULTI-UNIT PROSTHETIC SCREW

907151

Install with Unigrip™ Driver.

RP ANGLED MULTI-UNIT ABUTMENT SCREW 907149

Install with Unigrip™ Driver.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Prosthetics

TRU®

ORA IMPLANT ABUTMENT Narrow Platform 1.0mm Cuff 904680 2.0mm Cuff 904681 3.0mm Cuff 904682 4.0mm Cuff 904683 5.0mm Cuff 904684

Regular Platform 1.0mm Cuff

904675 904676 904677 904678

2.0mm Cuff 3.0mm Cuff 4.0mm Cuff

*SCAN BODIES Narrow Platform TRU® Scan Body Regular Platform TRU® Scan Body

904756

904757

ORA RETAINING CAP

904064

*TRU Scan Body NP packaged with TRU NP Prosthetic Screw 904656.TRU Scan Body RP packaged with TRU RP Prosthetic Screw 904657.

DIGITAL SPACERS Standard ERA®

ORA RETAINING RING

904002

904399 904400 914398 914407

Micro ERA®

ORA

Stern Snap®

ORA PROCESSING JIG

811001

*TI BASES Narrow Platform TRU® Ti Base Regular Platform TRU® Ti Base

904758

ORA IMPLANT ABUTMENT, .096" HEX DRIVER 904066

904759

*TRU Ti Base NP packaged with TRU NP Prosthetic Screw 904656. TRU Ti Base RP packaged with TRU RP Prosthetic Screw 904657.

WHITE O-RINGS, 5PK

909012

TRU® PROSTHETIC SCREW .050" HEX Narrow Platform 904656 Regular Platform 904657

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Prosthetics

TRU®

ERA® IMPLANT ANGLED ABUTMENTS (MICRO) Narrow Platform Regular Platform 1mm Cuff 812413 1mm Cuff

ERA® IMPLANT ABUTMENTS (MICRO) Narrow Platform

Regular Platform

812838 812839 812840 812841 812842 812843

812419 812420 812421 812422 812423 812424

812844 812845 812846 812847 812848 812849

1mm Cuff 2mm Cuff 3mm Cuff 4mm Cuff 5mm Cuff 6mm Cuff

0.5mm Cuff 2mm Cuff 3mm Cuff 4mm Cuff 5mm Cuff 6mm Cuff

812414 812415 812416 812417 812418

2mm Cuff 3mm Cuff 4mm Cuff 5mm Cuff 6mm Cuff

ERA® Micro Female

MICRO IMP. ABUTMENT TOOL KIT

811907

811212 811213 811214 811215 811252 811253

0° 5°

11° 17° 23° 30°

THUMB KNOB

905213

ERA SOCKET INSERT, MICRO 30°

905340

ERA® MICRO MALE PACKAGE

811008

ERA MICRO CORE CUTTER BUR

811023

ERA MICRO SEATING TOOL

811022

ERA MICRO ALIGNMENT HANDLES (2)

811456

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Prosthetics

TRU®

SNAP® ONE-PIECE IMPLANT ABUTMENTS (Torque to 30 Ncm) Narrow Platform Regular Platform 1mm Cuff 904568 1mm Cuff 904572 2mm Cuff 904569 2mm Cuff 904573 3mm Cuff 904570 3mm Cuff 904574 4mm Cuff 904571 4mm Cuff` 904575

ZEST LOCATOR® IMPLANT ABUTMENTS* Narrow Platform

(Torque to 30 Ncm)

Regular Platform

02070 02071 02072 02073

02076 02077 02078 02079 02080

STERN SNAP® ABUTMENT BASES* (Torque to 30 Ncm) Narrow Platform Regular Platform 1.75mm Cuff 904636 1.75mm Cuff

LOCATOR® MALE PROCESSING PKG 2pk

904632 904633 904634 904635

904637 904638 904639

3mm Cuff 4mm Cuff 5mm Cuff

08519-2 08519-10

10pk

*Choose one and add 904123 below for each abutment base ordered and appropriate retaining caps pictured below.

LOCATOR® EXT RANGE MALE PROCESS PKG 2pk 08540-2 10pk 08540-10 LOCATOR® PROCESSING SPACER 4pk 08569 20pk 08569-20

STERN SNAP® DENTIST TOOLKIT • 1 Removal Tool, 1 Flat Blade Square Driver, 1 .050" Hex Tool, short, tapered.

LOCATOR® CORE TOOL 08393

904129

SNAP® RETAINING CAPS-METAL FREE Assortment 904130 Yellow 904134 Green 904135 Brown 904136

LOCATOR® FEMALE ANALOG (4MM) 4pk 08530 20pk 08530-20 LOCATOR® FEMALE ANALOG (5MM) 4pk 08516 20pk 08516-20 LOCATOR® SQUARE DRIVER TORQUE WRENCH 15mm 08926 21mm 08927

LOCATOR® IS A REGISTERED TRADEMARK OF ZEST IP HOLDINGS, LLC, AND THE LOCATOR® IMPLANT ATTACHMENT SYSTEM IS MANUFACTURED BY ZEST DENTAL SOLUTIONS.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU® Implant System Prosthestics

TRU®

EZ PickUp® Attachment Processing Material Tissue-colored, automixing, self-curing attachment processing material. • Odorless • Low curing temperature

EZ PickUp®, Syringe, Tips & Varnish

220237

1 syringe @ 15 grams, 15 Tips and 5.0ml Varnish

EZ PickUp®, Syringe & Tips 1 syringe @ 15 grams and 15 Tips

220235

EZ PickUp® Tips (15)

220233

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU®

TRU® Implant System Prosthetics

• Self-curing • Color stable • Can be used on any standard resin for prosthetics • Dispenses with 1:1/2:1 Dispensing Gun

Quickline® - Introductory Kit 220180 1 cartridge (50 ml) QuickLine®,12 mixing tips, 2 bottles (10ml) (base and catalyst) Varnish, 1 bottle Primer (5 ml), 25 brushes, 1 mixing palette

Quickline® refill

220181

1 cartridge QuickLine® @ 50 ml, 12 mixing tips

Quickline® primer

220183

1 bottle Primer, 5 ml • Easy to use • Quick set up solvent evaporates in 1 minute • Provides adhesion between PMMA based material used for dentures and self-curing silicone

Quickline® Varnish 220182 2 bottles (base and catalyst), 10 ml each, 25 brushes, 1 mixing palette • Easy to use • Provides a glossy and lasting surface • Reduces plaque retention

• Reduces stain and odor build-up • Reapplicable for extended use • Quick drying time (5 minutes)

Quickline® mixing tips (50)

220162

Silicone Trimming Bur

811003

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU®

TRU® Surgical Protocol

STANDARD PLACEMENT

TRU® DRILL SEQUENCE

Implant Diameter

3.5mm body diameter

4.3mm body diameter

5.0mm body diameter

6.0mm body diameter

TRU ® Drill Sequence TRU ® Drill Sequence Recommended Speed 1,000-1,500 RPM (Paralleling Pin is for guide only )

Bone Taps (3.5, 4.3, 5.0, 6.0mm)

Implant Driver Hex Drivers

Recommended Speed 15-30 RPM

Recommended torque not to exceed 55Ncm

TRU® DRILL DEPTH

FINAL DRILLING STEPS

Final Drilling step when placing the 3.5mm TRU® Implant Enlarge the osteotomy using the 3.0mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique TRU® 3.5mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 4.3mm TRU® Implant Enlarge the osteotomy using the 3.8mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique TRU® 4.3mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 5.0mm TRU® Implant Enlarge the osteotomy using the 4.5mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique TRU® 5.0mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 6.0mm TRU® Implant Enlarge the osteotomy using the 5.5mm drill. If the bone is very dense, create internal threads in the osteotomy using the unique TRU® 6.0mm Titanium Bone Tap at 15-30 RPM.

Note: The TRU® and PUR® drills are not true-to -depth, the drill tip should not be included in determining the final depth of the osteotomy in coordination with indicator lines on each drill.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU®

TRU® Surgical Protocol STANDARD PLACEMENT

LANCE DRILL

TWIST DRILL

16 mm

1200 RPM

Clear the implant site by using a tissue punch or flap. Penetrate the cortical bone using the Lance Drill to mark the site and to guide the subsequent drills.

Penetrate the bone to the appropriate depth using the 2.0mm drill. Depth markings are on the drill (6, 8, 10, 12, 14, 16mm). Lance drill and 2.0mm Twist drill: 1000- 1500rpm. All other drills: 10rpm or less. Irrigate to control temperature.

PARALLELING PIN

FINAL DRILLING TO FULL DEPTH

Direction Indicator

Place a Paralleling Pin into one osteotomy and use this as a guide to help align with other implant sites. The Paralleling Pin can also be used as a depth gauge.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

TRU®

TRU® Surgical Protocol

STANDARD PLACEMENT

IMPLANT DRIVER

The TRU® Implant Driver is used to drive all TRU® implants. Insert at 15-30 RPM, with torque not to exceed 55 Ncm. Once the implant is completely seated, pull to remove the driver from the implant.

TRU® implants are packaged without an Implant Mount attached. The TRU® Implant Drivers are used to carry the implant from the package to the surgical site and to drive the implant into the bone. Simply press the appropriate driver into the implant until the hex area on the driver engages the hex inside the implant.

Fully seated TRU® Implant

COVER SCREW

HEALING ABUTMENT

The appropriate TRU® Cover Screw may be used if this is to be a two-stage surgery. Tighten the cover screw with a .050” hex driver

If this is to be a one-stage surgery, the appropriate TRU® Healing Abutment is placed and tightened using a .050” hex driver.

DENTAL IMPLANTS

WWW.STERNGOLD.COM

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61

Made with FlippingBook - professional solution for displaying marketing and sales documents online