ShelterPro Chimney Systems Product Guide

ShelterPro Chimney Systems

VENTING SOLUTIONS BUILT BETTER

Class A Chimney . . . . . . . . . 2

Installation Guide. . . . . . . . . . 9

Pellet Pipe . . . . . . . . . . . . . 14 Liner Systems . . . . . . . . . . .11

Made in uSA & Canada

ShelterPro Chimney Systems ShelterPro offers the perfect solution for multiple venting needs. All parts are manufactured with the best materials available and are made in the USA and Canada. Whether you are venting a wood stove, pellet stove or lining a masonry chimney, you will find practical and profitable solutions in the ShelterPro family of products.

ShelterPro Class A Chimney

ShelterPro incorporates the latest technology in factory-built chimney design; utilizing 304 stainless for the inside liner and the outside casing, providing superior performance, durability and safety. ShelterPro is designed to ser- vice today’s appliances, which are engineered to produce low emissions and high heat. ShelterPro is the choice of professionals who are looking for a better quality, factory-built chimney system.

Premium Grade 304 Stainless Steel construction of both the inner liner and the outer casing make ShelterPro extremely corrosion resistant. Embossed couplers do not allow moisture to penetrate the chimney’s outer wall. Sections simply ‘twist-lock’ together and may be secured with optional Lock- ing Bands. The ShelterPro product line features Deluxe Chimney Support Components that will enhance any installation. enhanced features

certifications & applications

ShelterPro is Safety Tested and Listed to applicable UL/ULC Standards, including: USA:UL103-HT Safety Standards for chimney serving solid fuel and liquid fuel appliances. This chimney system has been designed for use with wood stoves,

fireplaces and residential furnaces. Allowable Flue Gas Temperatures are: Maximum Continuous

1000° F / 540° C

Brief Forced Firing Creosote Burn Out

1400° F / 760° C (60 min.) 2100° F / 1150° C (3 x 10 min.)

smart choice lifetime warranty

All ShelterPro Supports are designed to carry four times the combined weight of each system of maxi- mum allowable height. supports/framing

The ShelterPro Smart Choice Lifetime Warranty applies to all Chimney components (not just insulated lengths) making a ShelterPro Chimney the smart choice every time (see written warranty for details).

Support and Framing Dimensions Table Ceiling Support Wall Support Cathedral Ceiling Support

Roof Support

Support Diameter

50’

38’

38’

50’

Framing Dimensions

6”Dia 8”Dia

12-3/8”x 12-3/8” 14-3/8”x 14-3/8” 14-3/8”x 14-3/8” 14-3/8”x 14-3/8”

12” x 12” 14” x 14”

N/A N/A

2

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

All ShelterPro Twist-Lock Couplers are embossed (not lanced) and seams are weather-proofed to prevent moisture from entering the chimney. In addition, the 1” space between the inner/outer walls is solid packed with Mineral Wool Fiber insulation to provide superior insulating qualities, in a “slim-line” design. Solid pack design performs favorably to blanket type and air-cooled designs. Construction

Premium Grade 304 Stainless Steel Inner Liner High grade material heats up quickly to enhance draft

Embossed Coupler Prevents moisture penetration

Premium Fiber Insulation 100% Mineral Wool (No Chlorides)

“Solid Pack” Insulation Augured in place for better insulating value (than blanket insulation) to keep outside temperatures low - for safety and inside temperatures high - for per- formance

Twist-Lock Connection Easy Assembly

Premium Grade 304 Stainless Steel Outer Casing Material prevents corrosion

The chimney must extend at least three feet above the highest point where it passes through the roof surface (not including the cap) and at least two feet higher than any part of the building within a horizontal distance of ten feet. height requirements

3

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Stainless Steel Chimney

ShelterPro Chimney includes a LIFETIME WARRANTY

Chimney Pipe: available in both 6” and 8” diameters and in the following lengths Part Number Description Length in inches SHP*L6 SS Class “A” Chimney 6 SHP*L12 SS Class “A” Chimney 12 SHP*L18 SS Class “A” Chimney 18 SHP*L24 SS Class “A” Chimney 24 SHP*L36 SS Class “A” Chimney 36

Insulated Tee Part Number Description SHP*ITP

Insulated Tee with Cap Insulated Tee Cap Only

SHP*ITPI

Locking Band Part Number Description SHP*SLB

Includes nut and bolt, 7/16”wide

* Both 6” and 8” available. Insert 6 or 8 for the part number.

4

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Supports and Adaptors

ShelterPro Chimney includes a LIFETIME WARRANTY

Decorator Ceiling Support Part Number Description SHP*CSB Cathedral Ceiling Support Part Number Description SHP*CCSB AdjustableWall Support Part Number Description SHP*AWS Roof Support Part Number Description SHP*RS Roof Guy Part Number Description SHP*URK Adaptor Plate Part Number Description SHP*AP Stainless Wall Band Part Number Description SHP*WB Black Stove Pipe Adaptor Part Number Description SHP*ASE

Sold as part of a kit only, see SHP*CSK on page 8

Sold as part of a kit only, see SHP*CCSK on page 8

Supports up to 38’ of chimney

Adjusts to any pitch, supports up to 50’ of chimney

Universal, fits any diameter

To be used with specifically listed factory built fireplaces

Maintains the mandatory clearance to combustibles

For an easy transition from black stove pipe to factory built chimney

* Both 6” and 8” available. Insert 6 or 8 for the part number.

5

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Flashings and Rain Caps

ShelterPro Chimney includes a LIFETIME WARRANTY

Galvalume Flashing Part Number Description SHP*AAF

SHP*AF

Adjustable 1/12 to 6/12, includes storm collar Adjustable 6/12 to 12/12, includes storm collar

SHP*AF SHP*ATC

6” Flat, includes storm collar

SHP*ATC

Dead Soft Aluminum Base Flashing Part Number Description SHP*TDSF

For corrugated metal roofs, includes storm collar

Galvalume Storm Collar Part Number Description SHP5*ASC-1 Installed above roof flashing

Deluxe Stainless Steel Rain Cap Part Number Description SHP*DRC

Premium quality stainless steel, twist-lock connection

Spark Arrestor Part Number Description SHP*SPAR

Stainless steel mesh, fits inside Deluxe Rain Cap

* Both 6” and 8” available. Insert 6 or 8 for the part number.

6

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Supports and Adaptors

ShelterPro Chimney includes a LIFETIME WARRANTY

BlackWall Thimble Part Number Description SHP*WTB

Black matte finish with brass trim

Attic Insulation Shield Part Number Description SHP*AIS

Designed to keep insulation away from chimney, and to maintain the mandatory 2” clearance to combustibles

Firestop Radiation Shield Part Number Description SHP*FRC

Also known as Firestop Joist Shield; maintains mandatory 2” clearance to combustibles

Rafter Radiation Shield Part Number Description SHP*RRS

The RRS must be installed where the chimney is enclosed immediately below the roof line

Galvalume Fire Stop Part Number Description SHP*FP

Also known as a finishing plate

* Both 6” and 8” available. Insert 6 or 8 for the part number.

7

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Ceiling, Wall and Elbow Kits

ShelterPro Chimney includes a LIFETIME WARRANTY

Standard Ceiling Support Kit Part Number Description SHP*CSK

Includes 1 each - Deluxe Ceiling Support; Deluxe Rain Cap; Stove Pipe to Chimney Adaptor; Attic Insulation Shield

Cathedral Ceiling Support Kit Part Number Description SHP*CCSK

Includes 1 each - Cathedral Ceiling Support; Stove Pipe to Chimney Adaptor; Deluxe Rain Cap

Wall Support Kit Part Number Description SHP*WSK

Includes 1 each- Wall Support Bracket; Stove Pipe to Chimney Adaptor; Wall Thimble; Deluxe Rain Cap; Insulated Tee; Locking Band; and 2 Wall Bands

Elbow Kit Part Number Description SHP*15ELK 15° Kit; Includes 2 Elbows; 1 Elbow Support; 4 Locking Bands

SHP*30ELK 30° Kit; Includes 2 Elbows; 1 Elbow Support; 4 Locking Bands

SHP*30ELK

* Both 6” and 8” available. Insert 6 or 8 for the part number.

8

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Installation

1 Before you begin, determine the inside diameter of your chimney. This is usually the same size (6” or 8”) as the flue collar on your wood stove or furnace. 2 Select type of installation by determining where your chimney will run. See illustrations of different installation types below.

STANDARD CEILING SUPPORT INSTALLATIONS

Two Story

Elbow Installation

One Story

Deluxe Rain Cap

Deluxe Rain Cap

Deluxe Rain Cap

Chimney Sections

Chimney Sections

Chimney Sections

Storm Collar

Storm Collar

Storm Collar Adjustable Roof Flashing

Adjustable Roof Flashing

Adjustable Roof Flashing

Firestop/Attic Insulation Shield

Stainless Steel Elbow

Firestop/Attic Insulation Shield

Chimney must be enclosed in living space

Firestop/Attic Insulation Shield

Decorator Ceiling Support

Stove Pipe Adaptor

Decorator Ceiling Support DoubleWall Stove Pipe

Chimney Sections

DoubleWall Stove Pipe

Decorator Ceiling Support DoubleWall Stove Pipe

Stove Pipe Adaptor

Stove Pipe Adaptor

WALL SUPPORT INSTALLATIONS

CEILING SUPPORT

Through a Soffit

With Cathedral Ceiling Support Box

One Story

Deluxe Rain Cap

Deluxe Rain Cap

Chimney Sections Storm Collar Adjustable Roof Flashing

Deluxe Rain Cap

Storm Collar

Adjustable Roof Flashing

Chimney Sections

Cathedral Ceiling Support

WallThimble

Stove Pipe Adaptor

Wall Band

Stove Pipe Adaptor

Stove Pipe Adaptor

Wall Band

WallThimble Stainless Steel Tee AdjustableWall Support

DoubleWall Stove Pipe

DoubleWall Stove Pipe

Stainless Steel Tee AdjustableWall Support

12”Length or InsulatedTee Plug

12”Length or InsulatedTee Plug

9

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Class A Chimney

Installation

3 Determine the number of Chimney lengths required. ShelterPro Chimney lengths are avail- able in 36”, 24”, 18”, 12”, and 6” lengths. The chimney must extend at least 3 feet above the highest point where it passes through the roof surface and at least 2 feet higher than any part of the building within a horizontal distance of 10 feet.

If the Chimney extends 5 feet or more above the roof, you must install a Universal Roof Guy Kit. Install first Wall Band 3 feet aboveWall Support, and add oneWall Band every 8 feet there after. Tee requires a chimney length to go through the wall, and it must extend a minimum of 3” into the room.

Min. 3 ft.

Attic Insulation Shield

Firestop Radiation Shield (Joist Shield) must be installed when the chimney passes from a lower living space into an upper living space. Note: You must enclose all sections of the chimney when it passes through accessible living areas. ShelterPro chimney requires ONLY 2”of clearance to combustibles.

NOTE: When calcu- lating the installed length of your chimney subtract 11/8” for each joint and include the height require- ments as shown in this illustration.

HEIGHT REQUIREMENTS

2’

3’ min.

2’

3’ min.

10’

A minimum of 9” clearance from the Ceiling/Wall is required when using DoubleWall Black Stove Pipe or 18”SingleWall Stove Pipe.

4 Choose the proper Roof Flashing required for your installation. To determine which Roof Flashing you require, work out the pitch of your roof. 0/12 - 6/12 Roof Pitch = SHP*AAF (Low Slope) 6/12 - 12/12 Roof Pitch = SHP*AF2 (Steep Slope) NOTE - for Metal Roofs use: Dead Soft Aluminum Base Flashing - SHP*TDSF

ROOF FLASHING SELECTION CHART

To calculate your roof pitch use two 12” rulers to mea- sure the number of inches (A) from the end of the other ruler down to the roof.

For example, if (A) equals 3”, then the roof pitch is 3/12.

(A)

CHIMNEY OFFSET CHART

5 Calculate the offset for Ceil- ing Support Installations. If an offset is required to avoid rafters or other obstructions, measure the horizontal distance required and the vertical height available. Then refer to the Chimney Offset Chart in order to determine which Elbows and Chimney Lengths are required.

A: Offset

6" Diameter 8" Diameter

A B

Elbow Chimney Lengths A B

1 "

10 "

1

10”

2 x 15° no chimney length 2 x 15° 2 x 15° 2 x 15° 2 x 15° 6" chimney length 12" chimney length 24" chimney length 36" chimney length

2 "

14 20

15 "

2 1/2” 4”

21"

4" 7"

B: Height

7"

32 " 44 " 14 "

32"

10 "

43 "

10 " 2 " 5 " 8 " 14 " 20 "

"

11

"

3

no chimney length 6" chimney length 12" chimney length 24" chimney length 36" chimney length

2 x 30° 2 x 30° 2 x 30° 2 x 30° 2 x 30°

6" 9"

18 "

15 "

24"

21"

31 " 41 "

15" 21"

32 " 44 "

* Both 6” and 8” available. Insert 6 or 8 for the part number.

10

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Liner

ShelterPro Liner

ShelterPro Liner is made from 316L stainless steel and is designed to reline existing chimneys or to be used in new construction. ShelterPro liner is manufactured from the highest grade mill certified stainless steel alloy. It is made from continuous strip of 7-ply stainless steel that is interlocked and crimped to produce a gas and watertight lining system of superior strength and durability. Its corrugated construction allows for expansion and contraction during heat up and cool down periods, removing any stress on the system.

• ShelterPro Liner is .006” thick steel, the industry standard. • It has a lifetime transferrable warranty that is valid if properly maintained by a chimney professional. • ShelterPro Liner is listed by Underwriters Laboratories to UL1777, UL64, UL441 standards for insulation. It is an all-fuel liner and can be used for wood, coal, oil, corn, and gas appliances. Features

ShelterPro Universal Liner Kits

ShelterPro Universal Kits come with installation instructions and a lifetime warranty. This kit has been installed in venting applications since 1992 and continues to be the most popular “all fuels” kit being offered. Other sizes are available including 3”-8” inside diameter (ID) in our .006” (CB) liners.

The ShelterPro uNIVERSAL Liner Kit Includes:

• Top kit which includes a rain cap, storm collar, top clamp and a 13”x13” top plate • Two part tee with removable 10” length take off (snout) made of 316 stainless • Tee end cap 316 stainless • Stove adaptor • Every job is unique, therefore if you need a larger plate size top kit,

add $5 to the cost of the kit and specify when ordering. • All universal tees have a snout length of 10”, if you need an extended snout for your tee, specify when ordering. For all fuel applications, call Customer Service with questions.

11

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Liner

ShelterPro Universal Liner Kits

Manuf ac tur ed w i th . 006 ” :

3”

4”

5”

5.5”

6”

7”

8”

20’

NCCB320UK

NCCB420UK

NCCB520UK

NCCB5520UK

NCCB620UK

NCCB720UK

NCCB820UK

25’

NCCB325UK

NCCB425UK

NCCB525UK

NCCB5525UK

NCCB625UK

NCCB725UK

NCCB825UK

30’

NCCB330UK

NCCB430UK

NCCB530UK

NCCB5530UK

NCCB630UK

NCCB730UK

NCCB830U

35’

NCCB335UK

NCCB435UK

NCCB535UK

NCCB5535UK

NCCB635UK

NCCB735UK

NCCB835UK

40’

NCCB340UK

NCCB440UK

NCCB540UK

NCCB5540UK

NCCB640UK

NCCB740UK

NCCB840UK

45’

NCCB345UK

NCCB445UK

NCCB545UK

NCCB5545KUK

NCCB645UK

NCCB745UK

NCCB845UK

50’

NCCB350UK

NCCB450UK

NCCB550UK

NCCB5550UK

NCCB650UK

NCCB750UK

NCCB850UK

ShelterPro Aluminum Liner

Features

ShelterPro’s 2 ply 3003 Aluminum Liner can be used to vent Category 1 gas appliances with A.F.U.E. of 83% or lower. In many cases, especially when only water heaters are vented into masonry flues, the gas appliances are vented into oversized flues. This practice may cause serious condensation and performance problems. By relining the chimney with ShelterPro Aluminum Liner you can reduce the condensation problem and improve the performance of the appliances.

12

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Liner

ShelterPro Aluminum Liner

Manuf ac tur ed w i th . 006 ” :

3”

4”

5”

5.5”

6”

7”

8”

10’

NCDB310EXT

NCDB410EXT

NCDB510EXT

NCDB5510EXT

NCDB610EXT

NCDB710EXT

NCDB810EXT

Extension 25’

NCDB325

NCDB425

NCDB525

NCDB5525

NCDB625

NCDB725

NCDB825

30’

NCDB330

NCDB430

NCDB530

NCDB5530

NCDB630

NCDB730

NCDB830

35’

NCDB335

NCDB435

NCDB535

NCDB5535

NCDB635

NCDB735

NCDB835

50’

NCDB350

NCDB450

NCDB550

NCDB5550

NCDB650

NCDB750

NCDB850

ShelterPro Aluminum Liner Kits

Each aluminum kit includes: • UL listed and tested 2 ply aluminum liner • Aluminum mortar collar for slipping the liner through the thimble • Aluminum top plate with a 16”x 16” plate and a 2” high collar around the hole diameter • Aluminum cap, and installation instructions

All ShelterPro Aluminum Liner Kits come with a 15 year warranty and are UL listed to UL441.

3”

4”

5”

5.5”

6”

7”

8”

10’

NCDB310EXT

NCDB410EXT

NCDB510EXT

NCDB5510EXT

NCDB610EXT

NCDB710EXT

NCDB810EXT

Extension 25’

NCDB325KIT

NCDB425KIT

NCDB525KIT

NCDB5525KIT

NCDB625KIT

NCDB725KIT

NCDB825KIT

30’

NCDB330KIT

NCDB430KIT

NCDB530KIT

NCDB5530KIT

NCDB630KIT

NCDB730KIT

NCDB830KIT

35’

NCDB335KIT

NCDB435KIT

NCDB535KIT

NCDB5535KIT

NCDB635KIT

NCDB735KIT

NCDB835KIT

50’

NCDB350KIT

NCDB450KIT

NCDB550KIT

NCDB5550KIT

NCDB650KIT

NCDB750KIT

NCDB850KIT

13

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Pellet Pipe

ShelterPro Pellet Pipe

ShelterPro gives you the safe, efficient, and cost-effective venting system that’s engineered precisely for pellet burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters’ Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. VP Pellet Pipe, when installed according to ShelterPro’s installation instructions, complies with National Safety Standards, such as NFPA 211. The system is rated for flue temperatures up to 570°F.

• Available in 3” and 4” diameters • Full line of fittings and full range of pipe lengths increase installation flexibility • Proven coupling joint connects in seconds to assure joint integrity • Gasketed joint design • Painted pipe lengths available for interior use • Double wall design with 1/4” airspace

• Inner wall 304 stainless steel, outer wall paintable galvanized steel • Rolled-over male end eliminates sharp edges • 1” clearance to combustibles • Removable tee cap for inspection and cleaning • Internal spacing bead assures uniform insulating airspace between pipe walls

Pellet Pipe Lengths: available in both 3” and 4” diameters and in the following lengths Part Number Description Length in inches *VP-12 12” Pellet Stove Pipe 12 *VP-24 24” Pellet Stove Pipe 24 *VP-36 36” Pellet Stove Pipe 36 *VP-EZADJ12 Adj. Pellet Stove Pipe adj

VP-EZADJ

VP

Pellet Pipe Tee Part Number Description *VP-TSB

Insulated Tee with Cap - Black

Elbow Part Number Description *VP-45EL

45° Elbow, factory sealed at couplers to prevent leakage 90° Elbow, factory sealed at couplers to prevent leakage

*VP-90EL

45°

90°

* Both 3” and 4” available. Insert 3 or 4 in place of * for the part number.

14

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

ShelterPro Pellet Pipe

Wall Bracket/Support Part Number Description *VP-WB Storm Collar Part Number Description *VP-SC Vertical Termination Part Number Description *VP-VC Horizontal Termination Part Number Description *VP-HC Adjustable Flashing Part Number Description *VP-AF Wall Thimble Part Number Description *VP-WT 3” to 4” Increaser Part Number Description 3VP-I4 Pipe Connector Part Number Description *VP-PC Multi-Fit Connector Part Number Description *VP-APC Vacuum Cleanout Cap Part Number Description *VP-VCC

Maintains clearance to combustibles

Seal inner edge with hi-temp silicone sealant

Vent termination for through-the-roof installations

Vent termination for through-the-wall installations

Used to waterproof installations that penetrate the roof line

Maintains airspace clearance

Used to adapt 3” pipe to 4” pipe

To connect pipes

Connects 3” flue collar to 4”VP parts

Eliminates need to remove tee cap to clean pipe

15

10950 Linpage Place, Saint Louis, MO 63132 • 800-325-7076

hy-c.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

www.hy-c.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online